Journal / Colored Birthstone
Landed Cost for Colored & Birthstone: The - HOLYCOME
If you are evaluating birthstone for your store, the useful question is not whether the design looks attractive in a listing photo. It is whether the specification, the MOQ, the lead time and the finish can hold up through a real selling season. This page sets out what we look at before we quote a run, and what we would ask you to check before you place one.
Unit price improves quickly with quantity because the setup cost — mould pass, stone matching, plating bath — is spread across more pieces. The setup is why a single sample costs more per piece than a bulk run, and why ordering a slightly larger quantity at a slightly lower MOQ tier often beats pushing the MOQ down to one.
There are cost lines you should not cut to win a cheaper quote. A thinner band, lighter plating or a lower stone grade saves a few cents per piece and shows up in the return rate. If a quote comes in well under the rest, ask for the weight, the plating micron and the stone grade on paper before you compare the headline number.
The wholesale price breaks into four broad lines: the metal, the stone, the bench labour, and the overhead that covers plating, certificate, packaging and export handling. Of those, labour and plating are the two a supplier can move honestly, while the stone line follows grade and carat. When a quote looks unusually low, the first place to look is the plating thickness and the shank weight, not the branding.
[1]Birthstone: the practical checks before you order
- Check the plating or finish at the high-friction points under a loupe, where wear shows first.
- Verify the prongs sit above the girdle and the stone sits level; a tilted stone reads as a cheap setting in any photo.
- Match the certificate number to the card before listing, and keep the batch sheet with the order records.
- Ask for the alloy declaration and confirm whether any nickel is added, especially for skin-sensitive customers.
- Confirm the size run, the millimeter measurements and the chain or band width on the listing.
[2]Planning the first run
After the lot arrives, compare it against the sample you approved rather than against the photograph. Weight, finish, stone match and setting position are the things that drift between sample and bulk, and they are measurable. Keep the arrival photos with the order record so a later exchange or a reorder starts from the same baseline.
When you plan the order, work backwards from the sell-through you can actually predict. A first batch that covers six to eight weeks of sales is easier to correct than a deep run that ties up cash in a style the market has not answered yet. Once the reorder pattern shows, the second buy can go wider on the silhouettes that moved first.
[3]Reference range in our catalogue
| Reference | Specification | MOQ | Unit range |
|---|---|---|---|
| Factory-Direct Lab-Grown Diamond Round Loose Moissan | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
| Wholesale Lab-Grown Diamond Round Earrings in 925 St | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
| Custom Private Label Lab-Grown Diamond Round Necklac | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
| Round Minimal Moissanite Ring | Moissanite · 925 Sterling Silver | 1 | on request |
| Wholesale Manufacturer Lab-Grown Diamond Round Neckl | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
Ranges reflect current factory pricing for this catalogue and move with metal and stone costs; treat them as planning figures and confirm against a written quotation.
[4]Where the wholesale price sits
| Component | Share | At $21.00 per piece |
|---|---|---|
| Metal and casting | 17% | $3.57 |
| Stone and setting | 32% | $6.72 |
| Labour and finishing | 18% | $3.78 |
| Plating and surface | 7% | $1.47 |
| Certificate and packaging | 6% | $1.26 |
| Margin and export handling | 15% | $3.15 |
In our experience, most disputes on a wholesale order come from a spec that was spoken rather than written. The weight, the plating micron and the stone grade should appear on the order or the spec sheet, not only in the chat.
If you are putting together a first run in this category, start with the stock silhouettes, keep the size run standard, and let the sell-through decide where the next batch expands. That approach protects margin better than chasing the widest catalogue on day one.
[5]Buyer questions
What makes up the wholesale price?
Metal, stone, bench labour and the overhead for plating, certificate, packaging and export handling. Labour and plating are the lines a supplier can adjust honestly; the stone line follows grade and carat.
Where can cost be cut honestly without hurting quality?
Packaging tier, order quantity and size run are the cleanest places to adjust. Metal weight, plating thickness and stone grade are the lines not to cut, because those savings return as after-sales problems.
Can I order a sample before committing to bulk?
Yes. A sample from stock lets you judge weight, finish and communication before the bulk run; compare it against the spec sheet and keep arrival photos for the later comparison.
[6]Related reading
Read Custom Birthstone Jewelry: A Meaningful Commission Guide for the deeper walk-through.
Read Birthstone Hardness and Setting Choice for the deeper walk-through.