Journal / Jewelry Care
Why 925 Silver Tarnishes — and How to Store It
We spend most of our time on silver, so this guide is written from what comes back to the bench: the pieces that reorder, the complaints that should have been prevented, and the price lines that survive a marketplace margin. Treat the figures below as planning anchors rather than a fixed quotation; metal and stone costs move, and every lot is priced on its own specification.
Plating thickness is the spec that separates a durable silver piece from a thin-looking one. A thin rhodium layer wears through at the contact points within weeks to a couple of months; a thicker layer holds through most of a selling season. Ask for the plating micron on the spec sheet, and print it on the packing slip so the wear expectation is set before the piece reaches the customer.
Changing metal after approval means a separate casting run. A silver design proven in the catalogue can later be cast in 10K, 14K or 18K gold from the same CAD file without new tooling, but the gold version runs its own MOQ and its own quote. Plan the metal for the first buy; treat the metal upgrade as a second step once the design sells.
The metal line decides both the price tier and the after-sales picture. 925 silver with rhodium plating is the workhorse for fashion and bridal-testing ranges because it keeps the landed cost down while still carrying a prong setting; gold and platinum move the piece into a higher ticket and a longer-wear conversation. Which one suits the order depends on the customer and the retail, not on a preference between the two.
[1]Silver: the practical checks before you order
- Verify the prongs sit above the girdle and the stone sits level; a tilted stone reads as a cheap setting in any photo.
- Match the certificate number to the card before listing, and keep the batch sheet with the order records.
- Ask for the alloy declaration and confirm whether any nickel is added, especially for skin-sensitive customers.
- Confirm the size run, the millimeter measurements and the chain or band width on the listing.
- Photograph the batch on arrival so any later defect claim has a baseline to compare against.
[2]Planning the first run
Mixing the range on the first order is a judgment call. A small number of proven designs at a workable MOQ gives the bench less to set up and the buyer fewer decisions to defend if something underperforms. Reserve the experimental finishes and newer shapes for a later batch, once the core of the catalogue has proved itself with your customers.
Payment and sample terms should be settled before production starts. A sample order, the approved spec sheet, and the deposit schedule are the three documents that keep a bulk run from becoming a negotiation halfway through. If a supplier is vague on which of these are written down, that vagueness usually repeats on delivery day.
[3]Reference range in our catalogue
| Reference | Specification | MOQ | Unit range |
|---|---|---|---|
| Wholesale Lab-Grown Diamond Round Rings in 925 Sterl | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
| Custom Private Label Lab-Grown Diamond Round Loose M | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
| Wholesale Manufacturer Lab-Grown Diamond Round Brace | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
| Cuban Link Moissanite Chain — NS-0570 | Moissanite · 925 Sterling Silver | 1 | on request |
| Lab-Grown Diamond Stone NS-0325 | Lab-Grown · 925 Sterling Silver | 1 | on request |
Ranges reflect current factory pricing for this catalogue and move with metal and stone costs; treat them as planning figures and confirm against a written quotation.
[4]Where the wholesale price sits
| Component | Share | At $21.00 per piece |
|---|---|---|
| Metal and casting | 17% | $3.57 |
| Stone and setting | 39% | $8.19 |
| Labour and finishing | 16% | $3.36 |
| Plating and surface | 11% | $2.31 |
| Certificate and packaging | 9% | $1.89 |
| Margin and export handling | 14% | $2.94 |
We would not advise buying on the lowest quote alone. A unit price that sits well under the market usually comes back as a plating, weight or grade problem later, which costs more than the few cents saved per piece.
If you are putting together a first run in this category, start with the stock silhouettes, keep the size run standard, and let the sell-through decide where the next batch expands. That approach protects margin better than chasing the widest catalogue on day one.
[5]Buyer questions
Can the piece be remade in a different metal later?
A proven silver design can be cast later in 10K, 14K or 18K gold from the same CAD file, but the gold version runs its own MOQ and quote. Treat the metal upgrade as a second step once the design sells.
Which metal suits this price point?
925 silver with rhodium plating is the workhorse for fashion and bridal-testing ranges; gold and platinum move the piece into a higher ticket and longer-wear conversation. Choose against your customer and retail margin.
Can I order a sample before committing to bulk?
Yes. A sample from stock lets you judge weight, finish and communication before the bulk run; compare it against the spec sheet and keep arrival photos for the later comparison.
[6]Related reading
Read Silver Tarnish Prevention and Storage for the deeper walk-through.
Read Material Guide: 925 Silver, Moissanite and Lab for the deeper walk-through.