Journal / Wholesale Oem Factory
Repair and Refinish Path for Wholesale & OEM - HOLYCOME
If you are evaluating this jewellery category for your store, the useful question is not whether the design looks attractive in a listing photo. It is whether the specification, the MOQ, the lead time and the finish can hold up through a real selling season. This page sets out what we look at before we quote a run, and what we would ask you to check before you place one.
Plating thickness is the spec that separates a durable silver piece from a thin-looking one. A thin rhodium layer wears through at the contact points within weeks to a couple of months; a thicker layer holds through most of a selling season. Ask for the plating micron on the spec sheet, and print it on the packing slip so the wear expectation is set before the piece reaches the customer.
Changing metal after approval means a separate casting run. A silver design proven in the catalogue can later be cast in 10K, 14K or 18K gold from the same CAD file without new tooling, but the gold version runs its own MOQ and its own quote. Plan the metal for the first buy; treat the metal upgrade as a second step once the design sells.
The metal line decides both the price tier and the after-sales picture. 925 silver with rhodium plating is the workhorse for fashion and bridal-testing ranges because it keeps the landed cost down while still carrying a prong setting; gold and platinum move the piece into a higher ticket and a longer-wear conversation. Which one suits the order depends on the customer and the retail, not on a preference between the two.
[1]This jewellery category: the practical checks before you order
- Confirm the stone grade and carat on the spec sheet, and note whether it ships on a batch card or a per-stone report.
- Weigh the piece against the listed weight; an underweight shank or body is usually the first sign of a thin build.
- Check the plating or finish at the high-friction points under a loupe, where wear shows first.
- Verify the prongs sit above the girdle and the stone sits level; a tilted stone reads as a cheap setting in any photo.
- Match the certificate number to the card before listing, and keep the batch sheet with the order records.
[2]Planning the first run
When you plan the order, work backwards from the sell-through you can actually predict. A first batch that covers six to eight weeks of sales is easier to correct than a deep run that ties up cash in a style the market has not answered yet. Once the reorder pattern shows, the second buy can go wider on the silhouettes that moved first.
Mixing the range on the first order is a judgment call. A small number of proven designs at a workable MOQ gives the bench less to set up and the buyer fewer decisions to defend if something underperforms. Reserve the experimental finishes and newer shapes for a later batch, once the core of the catalogue has proved itself with your customers.
[3]Reference range in our catalogue
| Reference | Specification | MOQ | Unit range |
|---|---|---|---|
| Green Hexagon Moissanite Stone — NS-0723 | Moissanite · 925 Sterling Silver | 1 | on request |
| Asscher-Cut Custom Lab-Grown Gemstone Hoop Earrings | Lab-Grown · 925 Sterling Silver | 1 | on request |
| Six-Prong Moissanite Engagement Ring | Moissanite · 925 Sterling Silver | 1 | on request |
| Round Bezel Moissanite Necklace — MD009 | Moissanite · 925 Sterling Silver | 1 | on request |
| Moissanite Engagement Ring NS-0513 | Moissanite · 925 Sterling Silver | 1 | on request |
Ranges reflect current factory pricing for this catalogue and move with metal and stone costs; treat them as planning figures and confirm against a written quotation.
[4]Where the wholesale price sits
| Component | Share | At $50.00 per piece |
|---|---|---|
| Metal and casting | 14% | $7.00 |
| Stone and setting | 37% | $18.50 |
| Labour and finishing | 15% | $7.50 |
| Plating and surface | 10% | $5.00 |
| Certificate and packaging | 9% | $4.50 |
| Margin and export handling | 11% | $5.50 |
In our experience, most disputes on a wholesale order come from a spec that was spoken rather than written. The weight, the plating micron and the stone grade should appear on the order or the spec sheet, not only in the chat.
If you are putting together a first run in this category, start with the stock silhouettes, keep the size run standard, and let the sell-through decide where the next batch expands. That approach protects margin better than chasing the widest catalogue on day one.
[5]Buyer questions
Can the piece be remade in a different metal later?
A proven silver design can be cast later in 10K, 14K or 18K gold from the same CAD file, but the gold version runs its own MOQ and quote. Treat the metal upgrade as a second step once the design sells.
Which metal suits this price point?
925 silver with rhodium plating is the workhorse for fashion and bridal-testing ranges; gold and platinum move the piece into a higher ticket and longer-wear conversation. Choose against your customer and retail margin.
Can I order a sample before committing to bulk?
Yes. A sample from stock lets you judge weight, finish and communication before the bulk run; compare it against the spec sheet and keep arrival photos for the later comparison.
[6]Related reading
Read Hoops & Huggies Factory Direct: The Sample for the deeper walk-through.
Read Tennis Bracelets Wholesale: How the Second for the deeper walk-through.