Free express shipping over $99 GRA & IGI certificates Quote in 1 business day

Journal / Wedding Bridal

Wedding & Bridal Sets by Metal First: Reading - HOLYCOME
HOLYCOME / NOTESWedding Bridal  ●  17 November 2026  ●  6 MIN

Wedding & Bridal Sets by Metal First: Reading - HOLYCOME

This guide walks a wholesale or boutique buyer through wedding the way our bench would talk it through on a sample day: what the order actually consists of, where the cost sits, and the checks that decide whether the lot lands clean on your shelf. No catalogue adjectives, just the numbers and the decisions we see buyers get wrong most often.

Plating thickness is the spec that separates a durable silver piece from a thin-looking one. A thin rhodium layer wears through at the contact points within weeks to a couple of months; a thicker layer holds through most of a selling season. Ask for the plating micron on the spec sheet, and print it on the packing slip so the wear expectation is set before the piece reaches the customer.

Changing metal after approval means a separate casting run. A silver design proven in the catalogue can later be cast in 10K, 14K or 18K gold from the same CAD file without new tooling, but the gold version runs its own MOQ and its own quote. Plan the metal for the first buy; treat the metal upgrade as a second step once the design sells.

The metal line decides both the price tier and the after-sales picture. 925 silver with rhodium plating is the workhorse for fashion and bridal-testing ranges because it keeps the landed cost down while still carrying a prong setting; gold and platinum move the piece into a higher ticket and a longer-wear conversation. Which one suits the order depends on the customer and the retail, not on a preference between the two.

[1]Wedding: the practical checks before you order

  • Ask for the alloy declaration and confirm whether any nickel is added, especially for skin-sensitive customers.
  • Confirm the size run, the millimeter measurements and the chain or band width on the listing.
  • Photograph the batch on arrival so any later defect claim has a baseline to compare against.
  • Confirm the stone grade and carat on the spec sheet, and note whether it ships on a batch card or a per-stone report.
  • Weigh the piece against the listed weight; an underweight shank or body is usually the first sign of a thin build.

[2]Planning the first run

After the lot arrives, compare it against the sample you approved rather than against the photograph. Weight, finish, stone match and setting position are the things that drift between sample and bulk, and they are measurable. Keep the arrival photos with the order record so a later exchange or a reorder starts from the same baseline.

When you plan the order, work backwards from the sell-through you can actually predict. A first batch that covers six to eight weeks of sales is easier to correct than a deep run that ties up cash in a style the market has not answered yet. Once the reorder pattern shows, the second buy can go wider on the silhouettes that moved first.

[3]Reference range in our catalogue

ReferenceSpecificationMOQUnit range
Moissanite Wedding Band MA146Moissanite · 925 Sterling Silver1on request
Wheat-Weave Wedding Band925 Sterling Silver1on request
Moissanite Wedding Band NS-0740Moissanite · 925 Sterling Silver1on request

Ranges reflect current factory pricing for this catalogue and move with metal and stone costs; treat them as planning figures and confirm against a written quotation.

[4]Where the wholesale price sits

ComponentShareAt $14.00 per piece
Metal and casting16%$2.24
Stone and setting37%$5.18
Labour and finishing17%$2.38
Plating and surface10%$1.40
Certificate and packaging6%$0.84
Margin and export handling13%$1.82

We would not advise buying on the lowest quote alone. A unit price that sits well under the market usually comes back as a plating, weight or grade problem later, which costs more than the few cents saved per piece.

If you are putting together a first run in this category, start with the stock silhouettes, keep the size run standard, and let the sell-through decide where the next batch expands. That approach protects margin better than chasing the widest catalogue on day one.

[5]Buyer questions

Which metal suits this price point?

925 silver with rhodium plating is the workhorse for fashion and bridal-testing ranges; gold and platinum move the piece into a higher ticket and longer-wear conversation. Choose against your customer and retail margin.

Can the piece be remade in a different metal later?

A proven silver design can be cast later in 10K, 14K or 18K gold from the same CAD file, but the gold version runs its own MOQ and quote. Treat the metal upgrade as a second step once the design sells.

Can I order a sample before committing to bulk?

Yes. A sample from stock lets you judge weight, finish and communication before the bulk run; compare it against the spec sheet and keep arrival photos for the later comparison.

[6]Related reading

Ready when you are

Send a photograph. Get the price tomorrow.

Request a quote WhatsApp us

MOQ for a single commission is 1 piece; wholesale MOQ is 20 pcs per style. Sampling takes 7-14 days, bulk 15-25 days after CAD approval. Payment is T/T with a 30% deposit, balance before shipment; PayPal and major cards are accepted.

Every piece passes a quality check before dispatch, and authenticity is matched to its certificate, with a return policy and repair service after delivery. Our in-house jewelers and artisans have years of experience setting moissanite and lab-grown stones from responsible, traceable suppliers; customer reviews and commission testimonials are shared in our journal and on the about page. Questions? Email service@holycome.com or WhatsApp +86 13377447107.

WhatsApp us Get a quote
WhatsApp Email