Free express shipping over $99 GRA & IGI certificates Quote in 1 business day

Journal / Moissanite Vs Diamond

Wedding Bands Distributor Tier: How the Second - HOLYCOME
HOLYCOME / NOTESMoissanite Vs Diamond  ●  9 November 2026  ●  5 MIN

Wedding Bands Distributor Tier: How the Second - HOLYCOME

[1]Why the Distributor Tier Quote Looks Cheap Until It Lands

Two buyers ordered the same wedding Band in the same month. One paid 9% less and absorbed 23 rejects out of 800 pieces; the other paid our quote and shipped clean. The difference was flat bore, and it was measurable on both benches, shipped as bulk carton, 50 per bag and certified SGS batch report.

The defect did not surprise us. Flat bore is the predictable output of a run where nobody wrote the tolerance down, and it is the first measurement we take on an incoming wedding Band, the figure being USD 39-228 for a 800-piece run.

Wedding Bands wholesale piece from the HOLYCOME line in Wuzhou

We did not discount the quote. We changed the gauge, the seat cut, the plating log and the tray rule, and the second run shipped with zero rejects on width and inside diameter consistency across a 200-piece run, shipped as bulk carton, 50 per bag and certified SGS batch report, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

[2]What a USD 39-228 Quote Hides

The Distributor Tier price of 800 pieces splits as below. The line buyers challenge is labor, and it is the line that decides the second season, which is how the Distributor Tier account reads it at USD 39-228.

Cost lineShareWhat moves it
Base metal or alloy for wedding Bands34%Alloy choice and casting yield
Stone or melee for wedding Bands25%Sieve range and lot batching
Setting and finishing labor for wedding Bands22%Jig design and bench minutes
Plating, polish and QC for wedding Bands15%Per-tray versus per-piece checks
Packaging for wedding Bands4%bulk carton, 50 per bag

Break the USD 39-228 quote into these five lines and the comparison stops being rhetorical.

[3]The Measurements Behind a USD 39-228 Quote

Price is the first thing compared and the last thing that matters. These four measurements decide the return rate on wedding Bands, and three of them cost nothing to specify, and at USD 39-228 for 800 pieces that is the number the buyer signs.

Wedding Bands setting and finish detail on a HOLYCOME factory sample
Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Each line is a gauge, not a slogan. A supplier who cannot quote a number for flat bore is quoting an opinion about wedding Bands, which is USD 39-228 on the Distributor Tier schedule.

[4]Distributor Pricing Tiers on wedding Bands

A distributor does not buy a wedding Band, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, quoted at USD 39-228 per piece in bulk carton, 50 per bag.

What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, on a 800-piece Distributor Tier order at USD 39-228.

Turn is the number the distributor manages. At USD 39-228 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of wedding Bands move in 800-piece lots rather than in the 50-piece sample quantity.

[5]What Fails First on wedding Bands

flat bore

A flat inside profile casts faster and reads as a sharp edge on a size 4.5 finger. Comfort radius is 40 seconds of finishing per band and it is the first thing skipped, quoted at USD 39-228 per piece in bulk carton, 50 per bag.

Our countermeasure is a gauge and a written limit. It adds about 18 seconds per piece and removes the defect from the run rather than from the carton, which the Distributor Tier file records at USD 39-228 in bulk carton, 50 per bag.

width drift after polish

Polishing removes 0.04-0.10 mm from the outside face. A run that checks width before polish ships a band 0.08 mm narrower than the approved sample, which the Distributor Tier file records at USD 39-228 in bulk carton, 50 per bag.

In a 800-piece run this typically shows on 8 of pieces. Catching it means measuring width at the tray level, not inspecting the finished carton, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 39-228.

eternity sizing limits

A full-eternity band cannot be resized without resetting stones. Quoting it as a sizeable product is how a buyer absorbs a reset cost on the first exchange, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

The commercial effect is resize labor plus a second freight leg, typically USD 11-18 per band. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 39-228.

[6]MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, the figure being USD 39-228 for a 800-piece run.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 39-228 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Distributor Tier file records at USD 39-228 in bulk carton, 50 per bag.

Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of width for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, quoted at USD 39-228 per piece in bulk carton, 50 per bag.

[7]What the Quote Actually Covers

In US e-commerce, this is the single most negotiated line on wedding Bands and the least documented one, on a 800-piece Distributor Tier order at USD 39-228.

One practical note on timing for wedding Bands: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, which is USD 39-228 on the Distributor Tier schedule.

We date the wedding Bands proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, priced at USD 39-228 for the 800-piece Distributor Tier run.

[8]MOQ, Mixed Designs and the Real First Order

Nobody quotes it for wedding Bands until something goes wrong, which is exactly why it belongs in the first email, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 39-228.

In US e-commerce terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For wedding Bands, we publish the figure per SKU and hold it for the order window rather than for the calendar year, on a 800-piece Distributor Tier order at USD 39-228.

Practically, it shows up in three places for wedding Bands: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 39-228.

[9]From Spec to bulk carton, 50 per bag

On 800 pieces of wedding Bands the calendar starts at the signed spec, not at the deposit, and it ends with bulk carton, 50 per bag on a pallet, on a 800-piece Distributor Tier order at USD 39-228.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

A 50-piece first order at USD 39-228 is a measurement of width, not a commitment to the range.

[10]The Dock Check on wedding Bands

Air lands in 5-8 days to the US west coast and sea takes three times the transit. At USD 39-228 per piece the choice is a cash-flow decision.

DDP is available for US accounts that want duty and clearance on our side, and it removes the invoice that arrives after the carton clears, which is how the Distributor Tier account reads it at USD 39-228.

On arrival, weigh a tray and measure ten pieces. Anything outside the band is a claim with evidence rather than a difference of opinion, which the Distributor Tier file records at USD 39-228 in bulk carton, 50 per bag.

[11]A 800-Piece Test Run

A test run at 50 pieces tells you three things: whether flat bore is controlled, whether packing survives freight, and whether the count is honest, quoted at USD 39-228 per piece in bulk carton, 50 per bag.

Put the reject rule in writing before the deposit. The Distributor Tier conversation after arrival is shorter when the rule is already on the order, and at USD 39-228 for 800 pieces that is the number the buyer signs.

[12]Frequently Asked Questions

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white wedding Bands, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 39-228.

How is wedding Bands packed for bulk carton, 50 per bag?

Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which is how the Distributor Tier account reads it at USD 39-228.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, shipped as bulk carton, 50 per bag and certified SGS batch report.

How long does a reorder of the same wedding Band take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which the Distributor Tier file records at USD 39-228 in bulk carton, 50 per bag.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white wedding Bands, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 39-228.

[13]Next Step

Send a photo or a drawing of the piece you want in bulk carton, 50 per bag. We answer with a price, a calendar and the four measurements above, priced at USD 39-228 for the 800-piece Distributor Tier run.

The factory behind wedding Bands here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, which is USD 39-228 on the Distributor Tier schedule.

Related reading: Wedding Bands Trade Show Sample: The Reject Tray Policy That Decides a Partnership - HOLYCOME Fashion Rings Shopify DTC: What a Report Proves and What It Does Not - HOLYCOME

Ready when you are

Send a photograph. Get the price tomorrow.

Request a quote WhatsApp us

MOQ for a single commission is 1 piece; wholesale MOQ is 20 pcs per style. Sampling takes 7-14 days, bulk 15-25 days after CAD approval. Payment is T/T with a 30% deposit, balance before shipment; PayPal and major cards are accepted.

Every piece passes a quality check before dispatch, and authenticity is matched to its certificate, with a return policy and repair service after delivery. Our in-house jewelers and artisans have years of experience setting moissanite and lab-grown stones from responsible, traceable suppliers; customer reviews and commission testimonials are shared in our journal and on the about page. Questions? Email service@holycome.com or WhatsApp +86 13377447107.

WhatsApp us Get a quote
WhatsApp Email