Journal / Jewelry Care
Tennis Bracelets Trade Show Sample: The Reject - HOLYCOME
[1]Trade Show Sampling for tennis Bracelets
A trade show converts on the sample that leaves the booth, not on the catalogue that gets left behind. The sample card has to carry the model number, the metal, the stone size, the FOB price and the MOQ, or the follow-up email starts from zero, and the Trade Show Sample quote for it sits at USD 37-242.
Ten to twelve pieces on a tray is the useful number for tennis Bracelets. More than that and the buyer photographs instead of touching, and a photograph is not an order, on a 100-piece Trade Show Sample order at USD 37-242.
The follow-up window is seven days. After that the card sits in a stack. We write the quote the same week and put the sample in the post so the buyer has the piece on the desk when the price arrives, and the Trade Show Sample quote for it sits at USD 37-242.
[2]The Reject Tray Policy That Decides a Partnership
The brief was simple: 100 tennis Bracelets, 14K gold, delivered before July. The run that arrived carried 17 pieces with clasp torsion failure, and the buyer spent USD 25-80 on sorting before the goods reached a shelf, priced at USD 37-242 for the 100-piece Trade Show Sample run.
Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and clasp torsion failure is what a photograph fails to define, and at USD 37-242 for 100 pieces that is the number the buyer signs.
The fix cost about 20 seconds per tennis Bracelet and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, which is USD 37-242 on the Trade Show Sample schedule.

[3]What US buyers Check Before They Sign
Four lines decide whether tennis Bracelets at USD 37-242 sells through or comes back, and none of them appears on a typical trading-company quote.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Put these four into the purchase order and the Trade Show Sample argument after delivery becomes arithmetic, and at USD 37-242 for 100 pieces that is the number the buyer signs.
[4]Where USD 37-242 Per Piece Actually Goes
Cost per piece at USD 37-242 leaves little room for assumption. The table shows which line compresses and which one only moves quality.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for tennis Bracelets | 30% | Alloy choice and casting yield |
| Stone or melee for tennis Bracelets | 20% | Sieve range and lot batching |
| Setting and finishing labor for tennis Bracelets | 19% | Jig design and bench minutes |
| Plating, polish and QC for tennis Bracelets | 12% | Per-tray versus per-piece checks |
| Packaging for tennis Bracelets | 19% | display tray with sample card |
A factory with no bench minutes per piece has never costed tennis Bracelets at USD 37-242. Ask for minutes and for the reject rule.
[5]The Reject Tray Policy That Decides a Partnership
Most quotes for tennis Bracelets describe the product and skip the part that decides whether the buyer makes money, which is USD 37-242 on the Trade Show Sample schedule.
The commercial version of this question for tennis Bracelets is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, certified GRA report and packed display tray with sample card at 100 pieces.
That clause matters more than a discount on tennis Bracelets. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, quoted at USD 37-242 per piece in display tray with sample card.
[6]What the Quote Actually Covers
This is the question that separates a trading company from a factory, and on tennis Bracelets the answer is usually shorter than buyers expect, quoted at USD 37-242 per piece in display tray with sample card.
What buyers underestimate on tennis Bracelets is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, the figure being USD 37-242 for a 100-piece run.
We plan a 3-5% buffer on first runs of tennis Bracelets and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, and at USD 37-242 for 100 pieces that is the number the buyer signs.
[7]Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Trade Show Sample order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and at USD 37-242 for 100 pieces that is the number the buyer signs.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 37-242 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the display tray with sample card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is how the Trade Show Sample account reads it at USD 37-242.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of clasp torsion resistance for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, the figure being USD 37-242 for a 100-piece run.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, the figure being USD 37-242 for a 100-piece run.
[8]The Three Failures We See Most in Incoming Samples
link gap growth
Gaps between links grow when the connecting pin is 0.05 mm under size. A pin gauge on every tenth piece catches it cheaply, priced at USD 37-242 for the 100-piece Trade Show Sample run.
The commercial effect is clasp replacement plus reship, typically USD 9-15 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, certified GRA report and packed display tray with sample card at 100 pieces.
length drift on bangles
A bangle that measures 6.9 inch instead of 7.0 slides differently on the wrist. Oval versus round form changes the fit even at the same number, shipped as display tray with sample card and certified GRA report.
Our countermeasure is a gauge and a written limit. It adds about 20 seconds per piece and removes the defect from the run rather than from the carton, and the Trade Show Sample quote for it sits at USD 37-242.
clasp torsion failure
A box clasp rated for a necklace fails under wrist rotation. The clasp has to be tested in torsion, not only in pull, which the Trade Show Sample file records at USD 37-242 in display tray with sample card.
In a 100-piece run this typically shows on 17 of pieces. Catching it means measuring clasp torsion resistance at the tray level, not inspecting the finished carton, certified GRA report and packed display tray with sample card at 100 pieces.
[9]What This Means for a First Order
A first Trade Show Sample order of 50 pieces per design at USD 37-242 is a test of the line, not a commitment to the range.
Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, shipped as display tray with sample card and certified GRA report, certified GRA report and packed display tray with sample card at 100 pieces.
[10]How a Repeat Order Gets Built
The sequence below is fixed for a Trade Show Sample run. The dates move with the stone lot, not with the shipping season, which is how the Trade Show Sample account reads it at USD 37-242.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Trade Show Sample shipment, priced at USD 37-242 for the 100-piece Trade Show Sample run.
[11]Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, which the Trade Show Sample file records at USD 37-242 in display tray with sample card.
For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, quoted at USD 37-242 per piece in display tray with sample card.
Check the count, the weight and clasp torsion resistance and overall length within +/-3 mm before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, certified GRA report and packed display tray with sample card at 100 pieces, quoted at USD 37-242 per piece in display tray with sample card.
[12]Frequently Asked Questions
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if clasp torsion failure shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, certified GRA report and packed display tray with sample card at 100 pieces.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and at USD 37-242 for 100 pieces that is the number the buyer signs.
What is the minimum order for tennis Bracelets?
50 pieces per tennis Bracelet. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, priced at USD 37-242 for the 100-piece Trade Show Sample run.
Do you supply certificates for tennis Bracelets?
GRA report on tennis Bracelets above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of clasp torsion resistance, which is what a counter or a listing actually needs, which is how the Trade Show Sample account reads it at USD 37-242.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if clasp torsion failure shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, certified GRA report and packed display tray with sample card at 100 pieces.
[13]Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Trade Show Sample, quoted at USD 37-242 per piece in display tray with sample card.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, on a 100-piece Trade Show Sample order at USD 37-242.
Related reading: Tennis Bracelets Q4 Holiday Stock: What the Quote Actually Covers - HOLYCOME Bracelets Bridal Boutique: The Sample Approval That Survives Production - HOLYCOME