Journal / Ring Size Fit
Ring Size & Fit: Five Myths That Cost Buyers - HOLYCOME
This guide walks a wholesale or boutique buyer through ring the way our bench would talk it through on a sample day: what the order actually consists of, where the cost sits, and the checks that decide whether the lot lands clean on your shelf. No catalogue adjectives, just the numbers and the decisions we see buyers get wrong most often.
Unit price improves quickly with quantity because the setup cost — mould pass, stone matching, plating bath — is spread across more pieces. The setup is why a single sample costs more per piece than a bulk run, and why ordering a slightly larger quantity at a slightly lower MOQ tier often beats pushing the MOQ down to one.
There are cost lines you should not cut to win a cheaper quote. A thinner band, lighter plating or a lower stone grade saves a few cents per piece and shows up in the return rate. If a quote comes in well under the rest, ask for the weight, the plating micron and the stone grade on paper before you compare the headline number.
The wholesale price breaks into four broad lines: the metal, the stone, the bench labour, and the overhead that covers plating, certificate, packaging and export handling. Of those, labour and plating are the two a supplier can move honestly, while the stone line follows grade and carat. When a quote looks unusually low, the first place to look is the plating thickness and the shank weight, not the branding.
[1]Ring: the practical checks before you order
- Verify the prongs sit above the girdle and the stone sits level; a tilted stone reads as a cheap setting in any photo.
- Match the certificate number to the card before listing, and keep the batch sheet with the order records.
- Ask for the alloy declaration and confirm whether any nickel is added, especially for skin-sensitive customers.
- Confirm the size run, the millimeter measurements and the chain or band width on the listing.
- Photograph the batch on arrival so any later defect claim has a baseline to compare against.
[2]Planning the first run
Payment and sample terms should be settled before production starts. A sample order, the approved spec sheet, and the deposit schedule are the three documents that keep a bulk run from becoming a negotiation halfway through. If a supplier is vague on which of these are written down, that vagueness usually repeats on delivery day.
After the lot arrives, compare it against the sample you approved rather than against the photograph. Weight, finish, stone match and setting position are the things that drift between sample and bulk, and they are measurable. Keep the arrival photos with the order record so a later exchange or a reorder starts from the same baseline.
[3]Reference range in our catalogue
| Reference | Specification | MOQ | Unit range |
|---|---|---|---|
| Moissanite Engagement Ring NS-0616 | Moissanite · 925 Sterling Silver | 1 | on request |
| Green Round Moissanite Engagement Ring | Moissanite · 925 Sterling Silver | 1 | on request |
| Pavé Four-Prong Moissanite Engagement Ring | Moissanite · 925 Sterling Silver | 1 | on request |
| Round Lab-Grown Diamond Ring — LGD-041 | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
| Wholesale Lab-Grown Diamond Round Rings in 925 Sterl | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
Ranges reflect current factory pricing for this catalogue and move with metal and stone costs; treat them as planning figures and confirm against a written quotation.
[4]Where the wholesale price sits
| Component | Share | At $19.00 per piece |
|---|---|---|
| Metal and casting | 21% | $3.99 |
| Stone and setting | 33% | $6.27 |
| Labour and finishing | 14% | $2.66 |
| Plating and surface | 8% | $1.52 |
| Certificate and packaging | 7% | $1.33 |
| Margin and export handling | 10% | $1.90 |
The pieces that reorder are rarely the most photographed ones. They are the ones that fit the customer, hold the finish and arrive without surprises — which is why we spend the inspection pass on fit and weight before the lot ships.
If you are putting together a first run in this category, start with the stock silhouettes, keep the size run standard, and let the sell-through decide where the next batch expands. That approach protects margin better than chasing the widest catalogue on day one.
[5]Buyer questions
What makes up the wholesale price?
Metal, stone, bench labour and the overhead for plating, certificate, packaging and export handling. Labour and plating are the lines a supplier can adjust honestly; the stone line follows grade and carat.
Where can cost be cut honestly without hurting quality?
Packaging tier, order quantity and size run are the cleanest places to adjust. Metal weight, plating thickness and stone grade are the lines not to cut, because those savings return as after-sales problems.
Can I order a sample before committing to bulk?
Yes. A sample from stock lets you judge weight, finish and communication before the bulk run; compare it against the spec sheet and keep arrival photos for the later comparison.
[6]Related reading
Read How to Design a Custom Engagement Ring in 2026 (Atelier for the deeper walk-through.
Read Custom Lab Grown Diamond Rings: IGI Reports and Cut for the deeper walk-through.