Free express shipping over $99 GRA & IGI certificates Quote in 1 business day

Journal / Ring Size Fit

Necklaces Made to Order: Sample to Container - HOLYCOME
HOLYCOME / NOTESRing Size Fit  ●  9 November 2026  ●  5 MIN

Necklaces Made to Order: Sample to Container - HOLYCOME

[1]Sample to Container: The Real Calendar in the Made to Order Program

A US buyer of necklaces came to us after 50 necklaces from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: clasp fatigue had drifted far enough that the buyer's own bench could not correct it without recutting, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

At 50 pieces the buyer was not buying a defect, they were buying a document. The Made to Order order carried a photo and a price, and clasp fatigue had nowhere to live, which is how the Made to Order account reads it at USD 32-225.

Necklaces wholesale piece from the HOLYCOME line in Wuzhou

Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, priced at USD 32-225 for the 50-piece Made to Order run.

[2]The Made-to-Order Path for necklaces

Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, which the Made to Order file records at USD 32-225 in single-piece foam box.

Twenty days is realistic for a new necklace when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, certified IGI report and packed single-piece foam box at 50 pieces.

The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, certified IGI report and packed single-piece foam box at 50 pieces.

Necklaces setting and finish detail on a HOLYCOME factory sample

[3]Three Failures That Reach the Made to Order Bench

link stretch

Chain stretch starts at the link join where the wire was drawn thin to save metal. Measuring wire diameter at both ends of a run catches it before shipping, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

The commercial effect is clasp replacement plus a goodwill credit, typically USD 7-12 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, on a 50-piece Made to Order order at USD 32-225.

pendant bail shadow

A bail plated in a separate barrel than the chain shows a different white tone under store light. Plating a set in one barrel is the fix, which the Made to Order file records at USD 32-225 in single-piece foam box.

Our countermeasure is a gauge and a written limit. It adds about 16 seconds per piece and removes the defect from the run rather than from the carton, shipped as single-piece foam box and certified IGI report.

clasp fatigue

A spring clasp rated by catalog rather than by pull test opens after 40-60 wear cycles. The rating belongs on the spec sheet, not on the website, which is USD 32-225 on the Made to Order schedule.

In a 50-piece run this typically shows on 17 of pieces. Catching it means measuring clasp pull strength at the tray level, not inspecting the finished carton, certified IGI report and packed single-piece foam box at 50 pieces.

[4]Four Spec Lines a Made to Order Buyer Checks

Most quotes describe the necklace and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, and the Made to Order quote for it sits at USD 32-225.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

[5]Terms Behind a Made to Order Order

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, the figure being USD 32-225 for a 50-piece run.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 32-225 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is how the Made to Order account reads it at USD 32-225.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of clasp pull strength for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is how the Made to Order account reads it at USD 32-225.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is USD 32-225 on the Made to Order schedule.

[6]Cost Split on a Made to Order Piece at USD 32-225

At USD 32-225 per piece for necklaces, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.

Cost lineShareWhat moves it
Base metal or alloy for necklaces32%Alloy choice and casting yield
Stone or melee for necklaces23%Sieve range and lot batching
Setting and finishing labor for necklaces21%Jig design and bench minutes
Plating, polish and QC for necklaces14%Per-tray versus per-piece checks
Packaging for necklaces10%single-piece foam box

The saving in the cheapest necklaces quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, which the Made to Order file records at USD 32-225 in single-piece foam box.

[7]Carton Cube, Duty and the Freight Line That Surprises Buyers

This is where necklaces stops being a commodity and starts being a supply relationship, which is USD 32-225 on the Made to Order schedule.

Three numbers decide it for necklaces: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, which the Made to Order file records at USD 32-225 in single-piece foam box.

We send a one-page sheet with every necklaces quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, and at USD 32-225 for 50 pieces that is the number the buyer signs.

[8]Alloy, Karat and the Cost of a Color Change

The figure below is what we quote for necklaces, and it is deliberately narrower than the market average, and the Made to Order quote for it sits at USD 32-225.

There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on necklaces and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, and at USD 32-225 for 50 pieces that is the number the buyer signs.

We would rather lose a first order of necklaces on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

[9]The First Made to Order Order

The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, which is USD 32-225 on the Made to Order schedule.

The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, on a 50-piece Made to Order order at USD 32-225.

[10]Getting single-piece foam box to US e-commerce

Export runs through Guangzhou or Shenzhen. For Made to Order orders the IGI report file travels with the shipping documents, not separately, which the Made to Order file records at USD 32-225 in single-piece foam box.

The clearance term matters more than the rate at 50 pieces. A duty surprise can cost more than the whole freight line, which is USD 32-225 on the Made to Order schedule.

The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against clasp pull strength and chain length within +/-3 mm, and at USD 32-225 for 50 pieces that is the number the buyer signs.

[11]The Calendar Behind a Made to Order Run

For single-piece foam box at 50 pieces, the sequence is fixed and the dates are the only thing that moves, and at USD 32-225 for 50 pieces that is the number the buyer signs.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

MOQ stays at 50 pieces per design on necklaces, low enough to test a shelf and high enough to keep the gauge check independent, certified IGI report and packed single-piece foam box at 50 pieces, priced at USD 32-225 for the 50-piece Made to Order run.

[12]Frequently Asked Questions

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, priced at USD 32-225 for the 50-piece Made to Order run.

How long does a reorder of the same necklace take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and at USD 32-225 for 50 pieces that is the number the buyer signs.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white necklaces, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, certified IGI report and packed single-piece foam box at 50 pieces.

How is necklaces packed for single-piece foam box?

Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which the Made to Order file records at USD 32-225 in single-piece foam box.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, priced at USD 32-225 for the 50-piece Made to Order run.

[13]Next Step

If the USD 32-225 band fits your shelf, send the drawing and we will quote the 50-piece Made to Order run inside one business day.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across necklaces and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

Related reading: Necklaces Private Label Carton: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME Necklaces Q4 Holiday Stock: What the Quote Actually Covers - HOLYCOME

Ready when you are

Send a photograph. Get the price tomorrow.

Request a quote WhatsApp us

MOQ for a single commission is 1 piece; wholesale MOQ is 20 pcs per style. Sampling takes 7-14 days, bulk 15-25 days after CAD approval. Payment is T/T with a 30% deposit, balance before shipment; PayPal and major cards are accepted.

Every piece passes a quality check before dispatch, and authenticity is matched to its certificate, with a return policy and repair service after delivery. Our in-house jewelers and artisans have years of experience setting moissanite and lab-grown stones from responsible, traceable suppliers; customer reviews and commission testimonials are shared in our journal and on the about page. Questions? Email service@holycome.com or WhatsApp +86 13377447107.

WhatsApp us Get a quote
WhatsApp Email