Journal / Moissanite Vs Diamond
Repair and Refinish Path for Moissanite vs. - HOLYCOME
If you are evaluating moissanite for your store, the useful question is not whether the design looks attractive in a listing photo. It is whether the specification, the MOQ, the lead time and the finish can hold up through a real selling season. This page sets out what we look at before we quote a run, and what we would ask you to check before you place one.
Plating thickness is the spec that separates a durable silver piece from a thin-looking one. A thin rhodium layer wears through at the contact points within weeks to a couple of months; a thicker layer holds through most of a selling season. Ask for the plating micron on the spec sheet, and print it on the packing slip so the wear expectation is set before the piece reaches the customer.
Changing metal after approval means a separate casting run. A silver design proven in the catalogue can later be cast in 10K, 14K or 18K gold from the same CAD file without new tooling, but the gold version runs its own MOQ and its own quote. Plan the metal for the first buy; treat the metal upgrade as a second step once the design sells.
The metal line decides both the price tier and the after-sales picture. 925 silver with rhodium plating is the workhorse for fashion and bridal-testing ranges because it keeps the landed cost down while still carrying a prong setting; gold and platinum move the piece into a higher ticket and a longer-wear conversation. Which one suits the order depends on the customer and the retail, not on a preference between the two.
[1]Moissanite: the practical checks before you order
- Check the plating or finish at the high-friction points under a loupe, where wear shows first.
- Verify the prongs sit above the girdle and the stone sits level; a tilted stone reads as a cheap setting in any photo.
- Match the certificate number to the card before listing, and keep the batch sheet with the order records.
- Ask for the alloy declaration and confirm whether any nickel is added, especially for skin-sensitive customers.
- Confirm the size run, the millimeter measurements and the chain or band width on the listing.
[2]Planning the first run
Mixing the range on the first order is a judgment call. A small number of proven designs at a workable MOQ gives the bench less to set up and the buyer fewer decisions to defend if something underperforms. Reserve the experimental finishes and newer shapes for a later batch, once the core of the catalogue has proved itself with your customers.
Payment and sample terms should be settled before production starts. A sample order, the approved spec sheet, and the deposit schedule are the three documents that keep a bulk run from becoming a negotiation halfway through. If a supplier is vague on which of these are written down, that vagueness usually repeats on delivery day.
[3]Reference range in our catalogue
| Reference | Specification | MOQ | Unit range |
|---|---|---|---|
| Pear Moissanite Ring — MA076 | Moissanite · 925 Sterling Silver | 1 | on request |
| Emerald-Cut Radiant-Cut Moissanite Necklace | Moissanite · 925 Sterling Silver | 1 | on request |
| Green Gemstone Moissanite Lab-Grown — NS-0467 | Moissanite · 925 Sterling Silver | 1 | on request |
| Emerald-Cut Moissanite Stone — NS-0165 | Moissanite · 925 Sterling Silver | 1 | on request |
| Champagne Moissanite Stone NS-0200 | Moissanite · 925 Sterling Silver | 1 | on request |
Ranges reflect current factory pricing for this catalogue and move with metal and stone costs; treat them as planning figures and confirm against a written quotation.
[4]Where the wholesale price sits
| Component | Share | At $46.00 per piece |
|---|---|---|
| Metal and casting | 21% | $9.66 |
| Stone and setting | 34% | $15.64 |
| Labour and finishing | 18% | $8.28 |
| Plating and surface | 8% | $3.68 |
| Certificate and packaging | 7% | $3.22 |
| Margin and export handling | 14% | $6.44 |
A buyer who asks for the sample, the spec sheet and the certificate first usually places the cleaner reorder. The supplier that resists those three before the first deposit is telling you something useful already.
If you are putting together a first run in this category, start with the stock silhouettes, keep the size run standard, and let the sell-through decide where the next batch expands. That approach protects margin better than chasing the widest catalogue on day one.
[5]Buyer questions
Can the piece be remade in a different metal later?
A proven silver design can be cast later in 10K, 14K or 18K gold from the same CAD file, but the gold version runs its own MOQ and quote. Treat the metal upgrade as a second step once the design sells.
Which metal suits this price point?
925 silver with rhodium plating is the workhorse for fashion and bridal-testing ranges; gold and platinum move the piece into a higher ticket and longer-wear conversation. Choose against your customer and retail margin.
Can I order a sample before committing to bulk?
Yes. A sample from stock lets you judge weight, finish and communication before the bulk run; compare it against the spec sheet and keep arrival photos for the later comparison.
[6]Related reading
Read Moissanite vs. Diamond: What Buyers Actually Need to Know for the deeper walk-through.
Read Is D-Color Moissanite Worth It in 2026? for the deeper walk-through.