Journal / Moissanite Vs Diamond
Moissanite vs. Diamond: Care That Protects - HOLYCOME
If you are evaluating moissanite and diamond for your store, the useful question is not whether the design looks attractive in a listing photo. It is whether the specification, the MOQ, the lead time and the finish can hold up through a real selling season. This page sets out what we look at before we quote a run, and what we would ask you to check before you place one.
Day-to-day wear does the damage, not a single accident. Moisture, perfume, sweat and friction against a handbag or a desk are what dull the surface and loosen a prong over time. The care routine that actually works is short: wear last, take off before showering or cleaning, and store the piece separately so it is not rubbing against other metal in the box.
Cleaning should stay gentle. Warm water, a drop of mild soap and a soft brush on the setting and under the stone is enough for most silver and plated pieces; ultrasonic cleaning on a regular basis can loosen prongs and drive moisture behind a plated layer. If the plating has worn through at the contact points, replating is a bench job, not something a polishing cloth fixes.
Tell your customers the expected finish interval up front. A plated silver piece worn daily shows the base metal at high-friction points within months, and that is normal wear rather than a defect. A care card that sets the expectation reduces the "it looks cheap" complaint that really means "the plating wore off sooner than I expected".
[1]Moissanite and diamond: the practical checks before you order
- Confirm the size run, the millimeter measurements and the chain or band width on the listing.
- Photograph the batch on arrival so any later defect claim has a baseline to compare against.
- Confirm the stone grade and carat on the spec sheet, and note whether it ships on a batch card or a per-stone report.
- Weigh the piece against the listed weight; an underweight shank or body is usually the first sign of a thin build.
- Check the plating or finish at the high-friction points under a loupe, where wear shows first.
[2]Planning the first run
When you plan the order, work backwards from the sell-through you can actually predict. A first batch that covers six to eight weeks of sales is easier to correct than a deep run that ties up cash in a style the market has not answered yet. Once the reorder pattern shows, the second buy can go wider on the silhouettes that moved first.
Mixing the range on the first order is a judgment call. A small number of proven designs at a workable MOQ gives the bench less to set up and the buyer fewer decisions to defend if something underperforms. Reserve the experimental finishes and newer shapes for a later batch, once the core of the catalogue has proved itself with your customers.
[3]Reference range in our catalogue
| Reference | Specification | MOQ | Unit range |
|---|---|---|---|
| Factory-Direct Lab-Grown Diamond Round Bracelets in | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
| Wholesale Lab-Grown Diamond Round Loose Moissanite S | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
| Factory-Direct Lab-Grown Diamond Round Lab-Grown Dia | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
| Moissanite Necklace NS-0535 | Moissanite · 925 Sterling Silver | 1 | on request |
| Wholesale Lab-Grown Diamond Round Rings in 925 Sterl | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
Ranges reflect current factory pricing for this catalogue and move with metal and stone costs; treat them as planning figures and confirm against a written quotation.
We would not advise buying on the lowest quote alone. A unit price that sits well under the market usually comes back as a plating, weight or grade problem later, which costs more than the few cents saved per piece.
The practical takeaway is straightforward: read the spec sheet before the price, hold the sample before the bulk, and judge the lot on weight, finish and stone match rather than on listing imagery. Do that consistently and the repeat orders mostly take care of themselves.
[4]Buyer questions
What damages the finish fastest?
Perfume, sweat, moisture and friction against other metal wear the surface down fastest. Take the piece off before showering or cleaning, and store it separately from other jewellery so the plating is not rubbed through in the box.
How often should the piece be cleaned?
A gentle soap-and-water clean every couple of weeks for worn daily pieces is enough. Avoid regular ultrasonic cleaning on plated or prong-set pieces, which can loosen settings and drive moisture behind plating.
Can I order a sample before committing to bulk?
Yes. A sample from stock lets you judge weight, finish and communication before the bulk run; compare it against the spec sheet and keep arrival photos for the later comparison.
[5]Related reading
Read Moissanite vs. Diamond: What Buyers Actually Need to Know for the deeper walk-through.
Read Is D-Color Moissanite Worth It in 2026? for the deeper walk-through.