Free express shipping over $99 GRA & IGI certificates Quote in 1 business day

Journal / Lab Grown Diamond

Lab Grown Diamond: QC and AQL: How to Set an - HOLYCOME
HOLYCOME / NOTESLab Grown Diamond  ●  16 November 2026  ●  6 MIN

Lab Grown Diamond: QC and AQL: How to Set an - HOLYCOME

Buyers often ask about diamond with a single number in mind — a price, a size, a delivery date. In practice those three are tied together: the MOQ changes the unit price, the specification changes the bench time, and the finish changes how long the piece lasts in the hand. We lay those connections out here so the first conversation with a factory starts from the same set of facts.

Our recommendation for a buyer new to the category is to keep the first run narrow: one or two proven silhouettes, a standard size run and a finish the catalogue already holds. Once the sell-through and the return pattern are visible, widen the range on the pieces that reorder rather than spreading the first budget across many designs.

Start the conversation from the product rather than the price. Look at what the piece is made of, what grade the stone carries, what the MOQ allows and how the finish is specified, then work the quote around that. A price compared across unknown specifications is the comparison that leads to the wrong reorder.

For a first order, a small sample or stock batch tells you how the factory handles fit, finish and communication before you commit volume. Read the sample against the spec sheet, photograph it on arrival, and use that baseline to judge the bulk lot when it ships. The repeat order is where the supplier relationship actually proves itself.

[1]Diamond: the practical checks before you order

  • Check the plating or finish at the high-friction points under a loupe, where wear shows first.
  • Verify the prongs sit above the girdle and the stone sits level; a tilted stone reads as a cheap setting in any photo.
  • Match the certificate number to the card before listing, and keep the batch sheet with the order records.
  • Ask for the alloy declaration and confirm whether any nickel is added, especially for skin-sensitive customers.
  • Confirm the size run, the millimeter measurements and the chain or band width on the listing.

[2]Planning the first run

Payment and sample terms should be settled before production starts. A sample order, the approved spec sheet, and the deposit schedule are the three documents that keep a bulk run from becoming a negotiation halfway through. If a supplier is vague on which of these are written down, that vagueness usually repeats on delivery day.

After the lot arrives, compare it against the sample you approved rather than against the photograph. Weight, finish, stone match and setting position are the things that drift between sample and bulk, and they are measurable. Keep the arrival photos with the order record so a later exchange or a reorder starts from the same baseline.

[3]Reference range in our catalogue

ReferenceSpecificationMOQUnit range
Custom Private Label Lab-Grown Diamond Round Loose MLab-Grown Diamond · 925 Sterling Silver1on request
Factory-Direct Lab-Grown Diamond Round Loose MoissanLab-Grown Diamond · 925 Sterling Silver1on request
Wholesale Manufacturer Lab-Grown Diamond Round LooseLab-Grown Diamond · 925 Sterling Silver1on request
Factory-Direct Lab-Grown Diamond Round Earrings in 9Lab-Grown Diamond · 925 Sterling Silver1on request
Wholesale Lab-Grown Diamond Round Lab-Grown GemstoneLab-Grown Diamond · 925 Sterling Silver1on request

Ranges reflect current factory pricing for this catalogue and move with metal and stone costs; treat them as planning figures and confirm against a written quotation.

[4]Where the wholesale price sits

ComponentShareAt $20.00 per piece
Metal and casting14%$2.80
Stone and setting34%$6.80
Labour and finishing18%$3.60
Plating and surface9%$1.80
Certificate and packaging8%$1.60
Margin and export handling11%$2.20

In our experience, most disputes on a wholesale order come from a spec that was spoken rather than written. The weight, the plating micron and the stone grade should appear on the order or the spec sheet, not only in the chat.

The practical takeaway is straightforward: read the spec sheet before the price, hold the sample before the bulk, and judge the lot on weight, finish and stone match rather than on listing imagery. Do that consistently and the repeat orders mostly take care of themselves.

[5]Buyer questions

What should my first order include?

A small sample or stock batch, the spec sheet and the certificate records. Judge the sample against the sheet, photograph it on arrival, and use that baseline for the bulk lot.

How do I start in this category?

Keep the first run narrow: one or two proven silhouettes, a standard size run and an existing finish. Once sell-through and returns are visible, widen the range on the pieces that reorder.

Can I order a sample before committing to bulk?

Yes. A sample from stock lets you judge weight, finish and communication before the bulk run; compare it against the spec sheet and keep arrival photos for the later comparison.

[6]Related reading

Ready when you are

Send a photograph. Get the price tomorrow.

Request a quote WhatsApp us

MOQ for a single commission is 1 piece; wholesale MOQ is 20 pcs per style. Sampling takes 7-14 days, bulk 15-25 days after CAD approval. Payment is T/T with a 30% deposit, balance before shipment; PayPal and major cards are accepted.

Every piece passes a quality check before dispatch, and authenticity is matched to its certificate, with a return policy and repair service after delivery. Our in-house jewelers and artisans have years of experience setting moissanite and lab-grown stones from responsible, traceable suppliers; customer reviews and commission testimonials are shared in our journal and on the about page. Questions? Email service@holycome.com or WhatsApp +86 13377447107.

WhatsApp us Get a quote
WhatsApp Email