Journal / Lab Grown Diamond
Lab Grown Diamond: Metal Choice: 925 Silver - HOLYCOME
If you are evaluating diamond and silver for your store, the useful question is not whether the design looks attractive in a listing photo. It is whether the specification, the MOQ, the lead time and the finish can hold up through a real selling season. This page sets out what we look at before we quote a run, and what we would ask you to check before you place one.
The metal line decides both the price tier and the after-sales picture. 925 silver with rhodium plating is the workhorse for fashion and bridal-testing ranges because it keeps the landed cost down while still carrying a prong setting; gold and platinum move the piece into a higher ticket and a longer-wear conversation. Which one suits the order depends on the customer and the retail, not on a preference between the two.
Plating thickness is the spec that separates a durable silver piece from a thin-looking one. A thin rhodium layer wears through at the contact points within weeks to a couple of months; a thicker layer holds through most of a selling season. Ask for the plating micron on the spec sheet, and print it on the packing slip so the wear expectation is set before the piece reaches the customer.
Changing metal after approval means a separate casting run. A silver design proven in the catalogue can later be cast in 10K, 14K or 18K gold from the same CAD file without new tooling, but the gold version runs its own MOQ and its own quote. Plan the metal for the first buy; treat the metal upgrade as a second step once the design sells.
[1]Diamond and silver: the practical checks before you order
- Weigh the piece against the listed weight; an underweight shank or body is usually the first sign of a thin build.
- Check the plating or finish at the high-friction points under a loupe, where wear shows first.
- Verify the prongs sit above the girdle and the stone sits level; a tilted stone reads as a cheap setting in any photo.
- Match the certificate number to the card before listing, and keep the batch sheet with the order records.
- Ask for the alloy declaration and confirm whether any nickel is added, especially for skin-sensitive customers.
[2]Planning the first run
After the lot arrives, compare it against the sample you approved rather than against the photograph. Weight, finish, stone match and setting position are the things that drift between sample and bulk, and they are measurable. Keep the arrival photos with the order record so a later exchange or a reorder starts from the same baseline.
When you plan the order, work backwards from the sell-through you can actually predict. A first batch that covers six to eight weeks of sales is easier to correct than a deep run that ties up cash in a style the market has not answered yet. Once the reorder pattern shows, the second buy can go wider on the silhouettes that moved first.
[3]Reference range in our catalogue
| Reference | Specification | MOQ | Unit range |
|---|---|---|---|
| Factory-Direct Lab-Grown Diamond Round Loose Moissan | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
| Bulk OEM D Color Lab-Grown Diamond Round Loose Moiss | Lab-Grown Diamond · 925 Sterling Silver | 1 | on request |
| Moissanite Watch Bezel NS-0470 | Moissanite · 925 Sterling Silver | 1 | on request |
| Emerald-Cut Moissanite Lab-Grown Gemstone | Moissanite · 925 Sterling Silver | 1 | on request |
| Emerald-Cut Moissanite Stone — NS-0678 | Moissanite · 925 Sterling Silver | 1 | on request |
Ranges reflect current factory pricing for this catalogue and move with metal and stone costs; treat them as planning figures and confirm against a written quotation.
[4]Where the wholesale price sits
| Component | Share | At $34.00 per piece |
|---|---|---|
| Metal and casting | 20% | $6.80 |
| Stone and setting | 41% | $13.94 |
| Labour and finishing | 15% | $5.10 |
| Plating and surface | 10% | $3.40 |
| Certificate and packaging | 6% | $2.04 |
| Margin and export handling | 12% | $4.08 |
We would not advise buying on the lowest quote alone. A unit price that sits well under the market usually comes back as a plating, weight or grade problem later, which costs more than the few cents saved per piece.
If you are putting together a first run in this category, start with the stock silhouettes, keep the size run standard, and let the sell-through decide where the next batch expands. That approach protects margin better than chasing the widest catalogue on day one.
[5]Buyer questions
Which metal suits this price point?
925 silver with rhodium plating is the workhorse for fashion and bridal-testing ranges; gold and platinum move the piece into a higher ticket and longer-wear conversation. Choose against your customer and retail margin.
Can the piece be remade in a different metal later?
A proven silver design can be cast later in 10K, 14K or 18K gold from the same CAD file, but the gold version runs its own MOQ and quote. Treat the metal upgrade as a second step once the design sells.
Can I order a sample before committing to bulk?
Yes. A sample from stock lets you judge weight, finish and communication before the bulk run; compare it against the spec sheet and keep arrival photos for the later comparison.
[6]Related reading
Read Moissanite vs. Diamond: What Buyers Actually Need to Know for the deeper walk-through.
Read Custom Lab Grown Diamond Rings: IGI Reports and Cut for the deeper walk-through.