Free express shipping over $99 GRA & IGI certificates Quote in 1 business day

Journal / Lab Grown Diamond

Lab Grown Diamond Growth Method Impact
HOLYCOME / NOTESLab Grown Diamond  ●  9 November 2026  ●  8 MIN

Lab Grown Diamond Growth Method Impact

A buyer in Antwerp consolidated two parcels from two growers and found that one parcel read grey under a colour grader and the other read white, even though both were certified G colour and both were CVD.

The growth method is on every lab report and it is rarely discussed at the buying table. It changes how a stone behaves under strain, how it grades after a re-polish, and how a parcel holds together across a run.

[1]The two methods

CVD grows diamond by depositing carbon onto a substrate wafer in a low pressure chamber. HPHT grows diamond by dissolving carbon in a metal flux at high pressure and high temperature, which is closer to how natural diamond forms.

Both produce diamond with the same crystal structure and the same hardness. The difference is in the trace elements, the strain pattern and the growth sector structure, and those three decide how the stone responds to grading and to re-polishing.

PropertyCVDHPHT
Growth directionLayer by layerSector by sector
Typical colour as grownBrownish, needs treatmentNear colourless
Strain patternUniform, lowConcentrated at sectors
Re-polish riskLowModerate
FluorescenceOften noneOften blue

The table is a tendency rather than a rule, because a specific stone can sit outside its method's average. It is still the right starting point for a buyer sorting a parcel.

Lab grown diamond ring with a high saturation blue stone on a dark background

[2]Why colour treatment follows CVD

CVD stones grow with a brown tint that comes from vacancies in the lattice. The tint is removed by a post-growth treatment that is disclosed on the report, and the treatment is what makes a CVD stone affordable at a white grade.

The treatment is stable, and it is the reason a CVD parcel can be graded D to F at a price HPHT cannot match. A buyer who reads the report's treatment field sees this in one line.

What the treatment field means

A report that states as grown with no treatment is describing an untreated stone, which is usually HPHT or a natural stone. A report that states treatment is describing a CVD stone whose colour was adjusted after growth.

Neither is a defect. The disclosure is the requirement, and a parcel with mixed disclosure is a parcel that has to be sorted before it is sold as one grade.

[3]Strain and the setting bench

CVD stones carry a low and uniform strain, which makes them predictable at the setting bench. HPHT stones carry strain concentrated at the growth sector boundaries, and that strain can release when the stone is heated or when a prong is torqued hard.

The practical consequence is on re-polish and repair. A stone that is re-polished to remove a chip can develop a feather from a strain line, and the feather appears after the work rather than before.

What to tell the bench

The bench should know the growth method before touching a stone. A CVD stone tolerates a normal setting routine; an HPHT stone is set with lower heat and lighter prong pressure.

That instruction costs one line on the work order and it prevents a stone that fails a month after delivery.

[4]Fluorescence and the parcel look

HPHT stones often show blue fluorescence under long wave light, and a parcel of them can read slightly cooler than its grade under daylight. CVD stones usually show none, which makes a CVD parcel read neutral.

A buyer mixing the two methods in one parcel gets a colour shift that appears in the tray rather than on the report. Sorting by method before grading is the cheap fix.

[5]Price and the method premium

CVD and HPHT stones trade at similar prices at the same grade, with a small premium on the method that is cheaper to produce at that size. The premium moves with capacity rather than with quality.

A buyer who specifies a method for consistency pays a small premium and gains a parcel that grades evenly. A buyer who buys on grade alone pays less and sorts more.

The size effect

Above 3 ct the two methods diverge more, because HPHT growth at large sizes is slower and the supply is thinner. A 4 ct HPHT stone carries a premium that a 1 ct HPHT stone does not.

[6]What the report shows

Four fields carry the method information: the growth method statement, the treatment statement, the fluorescence line and the comments section where a lab notes strain or graining.

A buyer who reads only the 4Cs misses all four. The comments section is where a lab puts the information that a grader noticed and could not express in a grade.

[7]What we do

We sort parcels by growth method before grading, state the method and the treatment on the invoice, and give the bench a setting instruction with each HPHT lot. Buyers who need one method across a run can specify it rather than discover it.

Minimum order is 50 pieces per design and sizes can be mixed. Sample lead time is around 20 days from approved CAD, bulk 25 to 30 days, and stock designs ship in 15 to 20 days under 500 pieces. Payment is a 30 percent deposit with the balance before shipment, by T/T, PayPal or Western Union.

[8]Grading consistency across a run

A single method parcel grades evenly because every stone grew under the same conditions, so the colour distribution within a grade band is narrow and a grader sees the same hue across the tray rather than a spread from warm to cool.

A mixed parcel grades unevenly even when every stone carries the same letter, because the method shifts the hue by a fraction that the letter does not capture. That fraction is invisible on the report and obvious when forty stones sit together under one lamp.

The cost of that unevenness is a return rate rather than a defect rate, because the customer compares two pieces from the same order rather than one piece against a photograph. Buyers who track returns by parcel see this as a colour variance claim, which is hard to dispute and easy to prevent.

[9]What a mixed parcel costs at the bench

A mixed parcel costs a sorting step before setting, and the sorting step is a bench hour that does not appear on any quote. On a 200 piece run that hour is trivial; on a 20 piece run it is the difference between a schedule that holds and one that slips.

The second cost is the setting instruction. A bench that sets a mixed parcel has to know which stones are HPHT before it starts, and a work order that does not say so will apply one heat profile to both methods.

The third cost is the re-polish decision. A stone that needs a chip removed is re-polished only if the bench knows the strain pattern, and a mixed parcel makes that judgement a guess rather than a reading.

[10]The certificate line a buyer should read first

Read the growth method line before the 4Cs, because it decides whether the rest of the report describes the stone the buyer thinks they bought. A report with a method the buyer did not expect is a report that will be re-read at delivery.

Read the treatment line second, because it decides whether the colour is as grown or adjusted. A buyer who assumes untreated and receives treated pays a premium for a stone that was priced without one.

Read the comments line third, because it holds the observations that have no field of their own. A comment about graining or strain is the lab telling a buyer that the stone will behave in a specific way at the bench, and it is the line most buyers skip.

[11]Repair policy for lab grown stones

A lab grown stone can be re-polished, re-set and re-tipped with the same tools as a natural stone, and the risk sits in the strain pattern rather than in the material. A stone with a strain line can release it under heat, and the release shows as a feather that was not there before.

The policy that follows is simple: state the method on the repair order, use lower heat on HPHT, and photograph the stone before and after. A photograph taken at intake is the only record that separates a pre-existing feather from one the bench caused.

For a bulk buyer the policy belongs in the supplier agreement rather than in a conversation, because a repair dispute across 200 pieces is a contract question and not a bench question.

[12]Frequently Asked Questions

Is CVD better than HPHT?

Neither is better. CVD is cheaper at white grades after treatment, HPHT has a lower strain risk profile at small sizes, and the choice is about consistency in a parcel.

Does the growth method affect value?

It affects price slightly and resale barely. The bigger effect is on parcel consistency and on how a stone behaves at repair.

Can the method be told from the stone?

Only with laboratory equipment. A loupe cannot separate the two, which is why the report field matters.

Should a parcel mix the methods?

Only if the buyer sorts before grading. A mixed parcel grades unevenly under daylight and the shift appears in the tray.

[13]Next step

Tell us the size range and the grade, and we will quote a single method parcel with the treatment disclosed on the invoice. See lab grown work in the archive, read the journal on parcel reports, or open a brief on the contact page.

Ready when you are

Send a photograph. Get the price tomorrow.

Request a quote WhatsApp us

MOQ for a single commission is 1 piece; wholesale MOQ is 20 pcs per style. Sampling takes 7-14 days, bulk 15-25 days after CAD approval. Payment is T/T with a 30% deposit, balance before shipment; PayPal and major cards are accepted.

Every piece passes a quality check before dispatch, and authenticity is matched to its certificate, with a return policy and repair service after delivery. Our in-house jewelers and artisans have years of experience setting moissanite and lab-grown stones from responsible, traceable suppliers; customer reviews and commission testimonials are shared in our journal and on the about page. Questions? Email service@holycome.com or WhatsApp +86 13377447107.

WhatsApp us Get a quote
WhatsApp Email