Journal / Jewelry Care
Jewelry Repair Intake Photograph Record
A buyer in Cleveland accepted 90 returned rings for re-plating and ended up paying for 6 stone replacements that were already loose when the pieces arrived.
A repair intake is evidence before it is a service. The photograph taken at intake decides who pays for a pre-existing fault, and most bulk return disputes are decided by whether that photograph exists.
[1]The four images
The set
Four images per piece: the face, the setting from the side, the inside of the band and the stone under magnification. Each answers a question that a later dispute will ask.
The face shows the finish and any wear on the plate. The side shows whether a prong is tight. The inside shows a hallmark, a size and an engraving. The magnification shows a fracture that a return may blame on the repair.
| Image | Answers | Taken |
|---|---|---|
| Face | Plate wear, finish | Intake |
| Setting side | Prong tightness | Intake |
| Band inside | Size, hallmark, text | Intake |
| Stone 10x | Fracture, inclusion | Intake |
The set takes about ninety seconds on a phone and it replaces a conversation that cannot be won without it.

[2]Who pays for a pre-existing fault
The split
A fault visible in the intake photograph is the owner's, and a fault that appears only afterward is the bench's. That split is the entire value of the record, and it is decided before the work rather than after.
A bench that does not photograph at intake absorbs every disputed fault, which is why a re-plate job can turn into a stone replacement at the bench's cost.
[3]The bulk return that has no record
A 90 piece return with no per-piece record is a single negotiation rather than ninety decisions. The buyer will argue that the faults came with the pieces and the bench will argue the opposite, and neither has evidence.
A per-piece record turns it into ninety small decisions, most of which are obvious once the intake image is on the table.
[4]What the intake form should hold
Five fields: the piece number, the four images, the stated service, the quoted price and the customer's instruction about a fault. The last field is the one that prevents a surprise, because it records whether the customer was told about a loose stone.
A form without that field produces a repair that the customer did not authorise, which is a free repair rather than a paid one.
[5]The margin arithmetic
Six stone replacements at 18 dollars each is 108 dollars against a re-plating job that may bill at 400. That is a quarter of the margin lost to an intake step that costs ninety seconds.
At 200 pieces a year the same pattern is over 2,000 dollars, which is the cost of a phone and a template.
[6]What we do
We photograph four images per piece at intake, record the stated service and the customer's fault instruction, and return the images with the finished piece. Buyers who send bulk returns receive the intake set before the work starts.
Minimum order is 50 pieces per design and sizes can be mixed. Sample lead time is around 20 days from approved CAD, bulk 25 to 30 days, and stock designs ship in 15 to 20 days under 500 pieces. Payment is a 30 percent deposit with the balance before shipment, by T/T, PayPal or Western Union.
[7]The photograph that is too late
A photograph after the work shows a repaired piece and proves nothing about the fault. The value of the record is that it precedes the repair, and a bench that photographs afterward has a document that helps the customer rather than the shop.
The practical rule is that the image set is captured before the piece is cleaned, because cleaning removes the evidence of a loose stone and of a plate break.
A bench that cleans first and photographs second loses the two most disputed faults.
[8]The return that arrives already damaged
A bulk return shipped without inner packing arrives with new damage, and the buyer disputes the repair cost as if it were a pre-existing fault. The intake image separates the two.
A piece that arrives with a new scratch is not a repair question, it is a freight claim, and the intake image is the document that supports it.
A buyer who photographs the unopened carton adds a stronger layer, because it shows the condition before unpacking.
[9]The record that a customer can see
Returning the intake set with the finished piece gives the customer a before and after, which is the most credible service proof a small jeweller can offer.
That proof is also the defence against a later claim, because the customer has already seen the fault that was present at intake.
[10]What a bulk intake needs beyond images
A piece number on the piece and on the bag, because ninety rings without numbers cannot be matched to their images. The numbering is the part that makes the record usable.
A buyer sending a bulk return should number every piece before packing, which is a minute per piece and it saves the matching argument later.
[11]The quote that changes after the work
A repair opened and inspected often reveals a worn prong that could not be seen before cleaning, and the quote changes. A bench that calls before proceeding keeps the job paid, and one that proceeds keeps the job free.
The intake form should have a field for the maximum authorised spend, so the bench knows when to call rather than when to stop. That number is agreed before the piece is opened.
A buyer who sends bulk returns should set the field per piece, because ninety pieces generate ninety decisions and only some need a call.
[12]The plating that hides a repair
A re-plate after a solder repair hides the joint, which is the point of plating. A repair without a re-plate leaves a visible seam, and a customer who expected invisible work will reject it.
The invoice should state whether the re-plate is included, because the same repair costs twice as much with it. A quote without that line is a quote that will be disputed at the invoice.
[13]The piece that should not be repaired
A band that has been re-sized three times has a joint that cannot take a fourth, and a bench that attempts it cracks the band. The correct answer is a remake, and the intake form is where that answer should be written.
A supplier who quotes a repair on an unrepairable piece is selling a service that will fail, which costs more than a decline at intake.
[14]What the record does for a reorder
The intake set documents the finish, the size and the setting of a piece that may be reordered, which is a second use for a record that was created for a dispute.
A buyer who reorders a design three years later can use an intake image to confirm the plate colour and the prong style, which is cheaper than re-approving a sample.
[15]The photograph that a customer sends
A customer's photograph of a fault is not an intake record, because it is taken after the fault and framed to show it. The bench still needs its own image taken before the work.
A customer photo is useful as a complaint and useless as evidence, and a bench that accepts one as the record has no record.
[16]The intake that a bench resists
A bench resists intake photography because it adds ninety seconds per piece on a day that is already full. The resistance lasts until the first disputed stone, and then it stops.
A buyer can make the step easier by numbering every piece before packing, which turns a per piece search into a lookup.
[17]Frequently Asked Questions
Why photograph a repair at intake?
It decides who pays for a pre-existing fault. A fault in the intake image belongs to the owner; one that appears later belongs to the bench.
How many images per piece?
Four: face, setting side, band inside and the stone at 10x. Ninety seconds on a phone covers all four.
What if the customer declines the extra repair?
Record the instruction on the form. A repair the customer did not authorise is a free repair.
Does this apply to a single ring?
Yes. A single disputed stone replacement costs more than the record, and the record is one photograph.
[18]Next step
Send the piece numbers and the service required, and we will return the intake set before the work. See repair work in the archive, read the journal on repair policy, or open a brief on the contact page.