Free express shipping over $99 GRA & IGI certificates Quote in 1 business day

Journal / Jewelry Care

Care & Maintenance by Metal First: Reading the - HOLYCOME
HOLYCOME / NOTESJewelry Care  ●  17 November 2026  ●  6 MIN

Care & Maintenance by Metal First: Reading the - HOLYCOME

If you are evaluating this jewellery category for your store, the useful question is not whether the design looks attractive in a listing photo. It is whether the specification, the MOQ, the lead time and the finish can hold up through a real selling season. This page sets out what we look at before we quote a run, and what we would ask you to check before you place one.

Day-to-day wear does the damage, not a single accident. Moisture, perfume, sweat and friction against a handbag or a desk are what dull the surface and loosen a prong over time. The care routine that actually works is short: wear last, take off before showering or cleaning, and store the piece separately so it is not rubbing against other metal in the box.

Cleaning should stay gentle. Warm water, a drop of mild soap and a soft brush on the setting and under the stone is enough for most silver and plated pieces; ultrasonic cleaning on a regular basis can loosen prongs and drive moisture behind a plated layer. If the plating has worn through at the contact points, replating is a bench job, not something a polishing cloth fixes.

Tell your customers the expected finish interval up front. A plated silver piece worn daily shows the base metal at high-friction points within months, and that is normal wear rather than a defect. A care card that sets the expectation reduces the "it looks cheap" complaint that really means "the plating wore off sooner than I expected".

[1]This jewellery category: the practical checks before you order

  • Match the certificate number to the card before listing, and keep the batch sheet with the order records.
  • Ask for the alloy declaration and confirm whether any nickel is added, especially for skin-sensitive customers.
  • Confirm the size run, the millimeter measurements and the chain or band width on the listing.
  • Photograph the batch on arrival so any later defect claim has a baseline to compare against.
  • Confirm the stone grade and carat on the spec sheet, and note whether it ships on a batch card or a per-stone report.

[2]Planning the first run

Payment and sample terms should be settled before production starts. A sample order, the approved spec sheet, and the deposit schedule are the three documents that keep a bulk run from becoming a negotiation halfway through. If a supplier is vague on which of these are written down, that vagueness usually repeats on delivery day.

After the lot arrives, compare it against the sample you approved rather than against the photograph. Weight, finish, stone match and setting position are the things that drift between sample and bulk, and they are measurable. Keep the arrival photos with the order record so a later exchange or a reorder starts from the same baseline.

[3]Reference range in our catalogue

ReferenceSpecificationMOQUnit range
Bulk OEM Lab-Grown Diamond Round Loose Moissanite StLab-Grown Diamond · 925 Sterling Silver1on request
Marquise Lab-Grown Gemstone RingLab-Grown · 925 Sterling Silver1on request
Lab-Grown Diamond PendantLab-Grown Diamond · 925 Sterling Silver1on request
Factory-Direct Lab-Grown Diamond Round Rings in 925 Lab-Grown Diamond · 925 Sterling Silver1on request
Bulk OEM Lab-Grown Diamond Round Loose Moissanite StLab-Grown Diamond · 925 Sterling Silver1on request

Ranges reflect current factory pricing for this catalogue and move with metal and stone costs; treat them as planning figures and confirm against a written quotation.

The pieces that reorder are rarely the most photographed ones. They are the ones that fit the customer, hold the finish and arrive without surprises — which is why we spend the inspection pass on fit and weight before the lot ships.

If you are putting together a first run in this category, start with the stock silhouettes, keep the size run standard, and let the sell-through decide where the next batch expands. That approach protects margin better than chasing the widest catalogue on day one.

[4]Buyer questions

How often should the piece be cleaned?

A gentle soap-and-water clean every couple of weeks for worn daily pieces is enough. Avoid regular ultrasonic cleaning on plated or prong-set pieces, which can loosen settings and drive moisture behind plating.

What damages the finish fastest?

Perfume, sweat, moisture and friction against other metal wear the surface down fastest. Take the piece off before showering or cleaning, and store it separately from other jewellery so the plating is not rubbed through in the box.

Can I order a sample before committing to bulk?

Yes. A sample from stock lets you judge weight, finish and communication before the bulk run; compare it against the spec sheet and keep arrival photos for the later comparison.

[5]Related reading

Read Three Custom Engagement Rings Samples Worth for the deeper walk-through.

Read A First Custom Engagement Rings Order Sized for the deeper walk-through.

Ready when you are

Send a photograph. Get the price tomorrow.

Request a quote WhatsApp us

MOQ for a single commission is 1 piece; wholesale MOQ is 20 pcs per style. Sampling takes 7-14 days, bulk 15-25 days after CAD approval. Payment is T/T with a 30% deposit, balance before shipment; PayPal and major cards are accepted.

Every piece passes a quality check before dispatch, and authenticity is matched to its certificate, with a return policy and repair service after delivery. Our in-house jewelers and artisans have years of experience setting moissanite and lab-grown stones from responsible, traceable suppliers; customer reviews and commission testimonials are shared in our journal and on the about page. Questions? Email service@holycome.com or WhatsApp +86 13377447107.

WhatsApp us Get a quote
WhatsApp Email