Free express shipping over $99 GRA & IGI certificates Quote in 1 business day

Journal / Lab Grown Diamond

Verifying IGI Report Numbers in Bulk
HOLYCOME / NOTESLab Grown Diamond  ●  9 November 2026  ●  8 MIN

Verifying IGI Report Numbers in Bulk

A buyer in Antwerp received 120 lab-grown stones against 120 IGI reports. The stones matched the parcels, the weights matched the reports, and two reports carried numbers that did not resolve on the laboratory's own lookup page. Both stones were fine. Both certificates were not.

The order was held for eleven days while the supplier reissued documents. The buyer's mistake was not buying from that supplier twice. It was checking the paperwork only at the invoice stage, where the goods had already shipped.

[1]Why the report number is the first check

A lab-grown report carries four identifiers that should agree: the report number, the stone's measurements, the carat weight and the girdle inscription. Checking one is not enough, because each can be correct while the set is wrong.

Reports get separated from stones in transit, reprinted after a grading error, and occasionally copied from another parcel. The number is the anchor: if it does not resolve to a record whose weight and measurements match the stone in your hand, the document does not describe that stone.

Resolving the number

Every major laboratory publishes a lookup where a report number returns the grading summary. Run every number in the shipment, not a sample, if the order is under 200 stones. Above that, run a documented AQL sample and reserve full checking for any parcel where one failure appears.

Reading the inscription

Lab-grown stones above roughly 0.30 ct usually carry a laser inscription on the girdle with the report number and, on some issues, a laboratory mark. The inscription must be read under magnification at the same time as the number is looked up, because an inscribed stone with a mismatched report is the failure mode that paperwork alone cannot catch.

Weight and measurements

Compare the stone on a calibrated scale against the report's carat weight, and compare its measured diameter against the stated measurements. A 1.01 ct stone measuring 6.3 mm is consistent with a report; a 1.01 ct stone measuring 5.9 mm is a different cut than the report describes.

Parcel of square cut lab grown diamonds with a 0.5 carat note and IGI certificate reference on a dark background

[2]What actually goes wrong in bulk

Four failure types account for most of the mismatches we see at the receiving bench. Three are clerical and one is commercial.

FailureWhat you seeRiskFix
Report swapped between stonesNumber resolves, weight off by 0.02-0.05 ctMisdescribed goodsRe-match by inscription and weight
Report number does not resolveLookup returns nothingDocument cannot be verifiedHold the stone, request reissue
Inscription missingNo laser mark under magnificationCannot tie stone to reportReject unless sold as uninscribed
Report from a different labNumber format differs from the issuerGrading standard mismatchConfirm the standard in the PO

[3]What the numbers on the report mean for a bulk buyer

Two reports can describe stones of the same colour and clarity grade and still price differently, because the grades are ranges and the measurements are not. A buyer comparing parcels on grade alone is comparing labels, not stones.

The fields that move price at the parcel level are the measurements, the table and depth percentages, the polish and symmetry grades, and the fluorescence comment. Two stones at the same grade with different depth percentages cut differently and return light differently, and the difference is visible in a line of melee.

Fluorescence comments

A report that notes strong fluorescence is describing a stone that may look milky in daylight and warmer under a colour-grading lamp. In a parcel, one strongly fluorescent stone among twenty reads as a duller stone in a line, which is why parcels are sorted by fluorescence before setting.

Polish and symmetry

Excellent polish and symmetry is the baseline for lab-grown goods at volume. A parcel carrying very good grades is a lower price and a different product, and the difference shows in the sharpness of the girdle reflection rather than in a photograph.

[4]Setting up a receiving check that holds

A check only works if it happens before payment and produces a record. Five steps cover the process we use on incoming parcels.

  1. Reconcile the packing list against the invoice and count stones by parcel
  2. Resolve every report number, recording the result against the line item
  3. Weigh each stone and compare to the report, flagging anything outside 0.01 ct
  4. Read the inscription on every stone above 0.30 ct
  5. Photograph the stone beside its report and store the image with the record

The photograph is the step most buyers skip and the one that settles disputes. A stone photographed next to its report, with the number legible, is evidence that the goods and the document travelled together.

[5]What the report does not tell you

A grading report describes a stone at one moment, under one set of conditions, against one laboratory's standard. It does not describe how the stone behaves in a setting, and it does not describe the parcel it came from.

How the stone will look set

A stone graded for colour in a master stone comparison is judged face up. Once set, it is seen at an angle, in a ring, under shop lighting, and the impression changes. This is why two stones with identical reports can look different in a finished ring, and why a buyer working at volume should judge a sample in a setting rather than on a tray.

What the parcel will repeat

A report covers a stone, not a production run. If the buyer needs four hundred stones over six months, the report tells them nothing about the second batch, and the second batch is where consistency complaints originate. Asking for the production run reference, rather than only the papers, is the check that protects a repeat order.

[6]Keeping a receiving record that survives

Documents get lost in transit and disputes are settled months later. A record that holds has three parts: the report number, the stone's measured weight and a photograph of the two together. We store the same three parts on our side, which means a question about a shipment from eighteen months ago can still be answered.

Buyers who keep that record can also resell with confidence, because the second buyer can verify the same chain without re-grading the stone.

[7]What to do when one stone fails

One failure in a parcel is a clerical issue. A pattern of failures is a supply issue, and the two call for different responses.

For a single mismatch, hold that stone, keep the parcel and request a corrected document or a replacement stone. For a pattern, stop the settlement, ask for the full report set in digital form and re-run the check on the whole shipment before releasing funds.

A supplier who resists a full re-check on a pattern of failures is telling you something about their document control, and that is worth more than the discount on the next order.

[8]What we provide on lab-grown orders

Every lab-grown parcel we ship carries reports matched to stones by weight and inscription, and the packing list repeats the report number against each line so the receiving check can run without re-keying data. Stones above 0.30 ct are inscribed, and we photograph each stone with its report before packing.

Minimum order is 50 pieces per design for finished jewellery, and loose parcels are quoted per carat with a minimum lot value. Sample lead time is around 20 days from an approved selection, and bulk 25 to 30 days; stock designs ship in 15 to 20 days under 500 pieces. Payment is a 30 percent deposit with the balance before shipment, by T/T, PayPal or Western Union, with volume pricing stepping down at 200 and 500 pieces.

For buyers running a grading programme of their own, we can supply the digital report set ahead of the shipment so the number check happens while the goods are still in our vault.

[9]Frequently Asked Questions

Should I check every report on a large parcel?

Check every number on orders under 200 stones. Above that, run a documented sample and switch to full checking if any line fails. The number lookup is fast; the inscription read is the slow part.

Is a missing inscription a defect?

Not if the stone was sold as uninscribed, which happens on small melee. Above 0.30 ct, an uninscribed stone should be declared before the order rather than discovered at receiving.

Do IGI and GIA grades compare directly?

Not exactly. The standards are close on colour and clarity for lab-grown goods but not identical, so a parcel graded by one laboratory should be compared with another parcel from the same laboratory before you draw a price conclusion.

What does a report cost?

It depends on stone size and service level, and it is usually quoted per stone rather than per parcel. On a bulk order the cost is small against the goods, and it is the cheapest risk control in the transaction.

[10]Next step

Send the size range and quantity you need, and we will return a parcel selection with the report set attached before you commit. Read the journal on fluorescence and melee grading, browse the archive for finished examples, or use the contact page to start a check on a current shipment.

Ready when you are

Send a photograph. Get the price tomorrow.

Request a quote WhatsApp us

MOQ for a single commission is 1 piece; wholesale MOQ is 20 pcs per style. Sampling takes 7-14 days, bulk 15-25 days after CAD approval. Payment is T/T with a 30% deposit, balance before shipment; PayPal and major cards are accepted.

Every piece passes a quality check before dispatch, and authenticity is matched to its certificate, with a return policy and repair service after delivery. Our in-house jewelers and artisans have years of experience setting moissanite and lab-grown stones from responsible, traceable suppliers; customer reviews and commission testimonials are shared in our journal and on the about page. Questions? Email service@holycome.com or WhatsApp +86 13377447107.

WhatsApp us Get a quote
WhatsApp Email