Free express shipping over $99 GRA & IGI certificates Quote in 1 business day

Journal / Lab Grown Diamond

Fashion Rings Factory Direct: 7 Supplier Checks - HOLYCOME
HOLYCOME / NOTESLab Grown Diamond  ●  10 November 2026  ●  5 MIN

Fashion Rings Factory Direct: 7 Supplier Checks - HOLYCOME

Buyers often ask about rings and ring with a single number in mind — a price, a size, a delivery date. In practice those three are tied together: the MOQ changes the unit price, the specification changes the bench time, and the finish changes how long the piece lasts in the hand. We lay those connections out here so the first conversation with a factory starts from the same set of facts.

Reject on documented defects, not on taste: a tilted stone, a prong on the table, a plating gap at the inner shank, or a weight under spec are all measurable. Photograph the batch before it leaves the bench so a later complaint has a baseline. A supplier that pushes back on a documented defect is one you will spend the whole order negotiating with.

A first sample tells you more than a catalogue of five. On the sample, check the band or shank weight against the spec, look at the plating under a loupe at the high-friction points, confirm the stone sits level and the prongs sit above the girdle, and weigh the piece. A hollow or underweight body is the first thing a repeat order exposes.

Ask for the certificate and the alloy declaration in writing. A GRA or batch card declares grade and carat; it is not the same as an independent laboratory report, and the listing should say which one applies. For metal, the alloy sheet states the silver grade or the gold karat and confirms whether any nickel is added, which matters for customers with sensitive skin.

[1]Rings and ring: the practical checks before you order

  • Match the certificate number to the card before listing, and keep the batch sheet with the order records.
  • Ask for the alloy declaration and confirm whether any nickel is added, especially for skin-sensitive customers.
  • Confirm the size run, the millimeter measurements and the chain or band width on the listing.
  • Photograph the batch on arrival so any later defect claim has a baseline to compare against.
  • Confirm the stone grade and carat on the spec sheet, and note whether it ships on a batch card or a per-stone report.

[2]Planning the first run

Payment and sample terms should be settled before production starts. A sample order, the approved spec sheet, and the deposit schedule are the three documents that keep a bulk run from becoming a negotiation halfway through. If a supplier is vague on which of these are written down, that vagueness usually repeats on delivery day.

After the lot arrives, compare it against the sample you approved rather than against the photograph. Weight, finish, stone match and setting position are the things that drift between sample and bulk, and they are measurable. Keep the arrival photos with the order record so a later exchange or a reorder starts from the same baseline.

[3]Reference range in our catalogue

ReferenceSpecificationMOQUnit range
2ct Pear Moissanite Ring, GRA CertifiedMoissanite · 925 Sterling Silver1on request
Round Lab-Grown Gemstone Stud EarringsLab-Grown · 925 Sterling Silver1on request
Custom Private Label Lab-Grown Diamond Round Rings iLab-Grown Diamond · 925 Sterling Silver1on request
Wholesale Manufacturer 0.5ct D Color Lab-Grown DiamoLab-Grown Diamond · 925 Sterling Silver1on request
Factory-Direct Lab-Grown Diamond Round Rings in 925 Lab-Grown Diamond · 925 Sterling Silver1on request

Ranges reflect current factory pricing for this catalogue and move with metal and stone costs; treat them as planning figures and confirm against a written quotation.

The pieces that reorder are rarely the most photographed ones. They are the ones that fit the customer, hold the finish and arrive without surprises — which is why we spend the inspection pass on fit and weight before the lot ships.

If you are putting together a first run in this category, start with the stock silhouettes, keep the size run standard, and let the sell-through decide where the next batch expands. That approach protects margin better than chasing the widest catalogue on day one.

[4]Buyer questions

Which certificate or declaration matters?

The stone card or report number and the alloy declaration. Confirm whether the certificate is a batch card or a per-stone report, and keep the number matched to the parcel records.

What should I check on the first sample?

Weight against spec, plating under a loupe at friction points, stone levelness, prong position and overall weigh-in. Photograph the sample on arrival as the baseline for the bulk lot.

Can I order a sample before committing to bulk?

Yes. A sample from stock lets you judge weight, finish and communication before the bulk run; compare it against the spec sheet and keep arrival photos for the later comparison.

[5]Related reading

Ready when you are

Send a photograph. Get the price tomorrow.

Request a quote WhatsApp us

MOQ for a single commission is 1 piece; wholesale MOQ is 20 pcs per style. Sampling takes 7-14 days, bulk 15-25 days after CAD approval. Payment is T/T with a 30% deposit, balance before shipment; PayPal and major cards are accepted.

Every piece passes a quality check before dispatch, and authenticity is matched to its certificate, with a return policy and repair service after delivery. Our in-house jewelers and artisans have years of experience setting moissanite and lab-grown stones from responsible, traceable suppliers; customer reviews and commission testimonials are shared in our journal and on the about page. Questions? Email service@holycome.com or WhatsApp +86 13377447107.

WhatsApp us Get a quote
WhatsApp Email