Free express shipping over $99 GRA & IGI certificates Quote in 1 business day

Journal / Custom Engagement Rings

Engagement Rings Distributor Tier: How the - HOLYCOME
HOLYCOME / NOTESCustom Engagement Rings  ●  9 November 2026  ●  5 MIN

Engagement Rings Distributor Tier: How the - HOLYCOME

[1]How the Second Order Becomes Cheaper

The brief was simple: 800 engagement Rings, 925 sterling silver, delivered before July. The run that arrived carried 17 pieces with prong geometry, and the buyer spent USD 25-75 on sorting before the goods reached a shelf, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and prong geometry is what a photograph fails to define, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces, quoted at USD 36-199 per piece in bulk carton, 50 per bag.

Engagement Rings wholesale piece from the HOLYCOME line in Wuzhou

The fix cost about 22 seconds per engagement Ring and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, the figure being USD 36-199 for a 800-piece run.

[2]Where USD 36-199 Per Piece Actually Goes

Cost per piece at USD 36-199 leaves little room for assumption. The table shows which line compresses and which one only moves quality.

Cost lineShareWhat moves it
Base metal or alloy for engagement Rings30%Alloy choice and casting yield
Stone or melee for engagement Rings20%Sieve range and lot batching
Setting and finishing labor for engagement Rings19%Jig design and bench minutes
Plating, polish and QC for engagement Rings12%Per-tray versus per-piece checks
Packaging for engagement Rings19%bulk carton, 50 per bag

A factory with no bench minutes per piece has never costed engagement Rings at USD 36-199. Ask for minutes and for the reject rule.

[3]What US buyers Check Before They Sign

Four lines decide whether engagement Rings at USD 36-199 sells through or comes back, and none of them appears on a typical trading-company quote.

Engagement Rings setting and finish detail on a HOLYCOME factory sample
Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Put these four into the purchase order and the Distributor Tier argument after delivery becomes arithmetic, the figure being USD 36-199 for a 800-piece run.

[4]Distributor Pricing Tiers on engagement Rings

A distributor does not buy a engagement Ring, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, which is USD 36-199 on the Distributor Tier schedule.

Turn is the number the distributor manages. At USD 36-199 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of engagement Rings move in 800-piece lots rather than in the 50-piece sample quantity.

[5]The Three Failures We See Most in Incoming Samples

prong geometry

A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

In a 800-piece run this typically shows on 17 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, which is how the Distributor Tier account reads it at USD 36-199.

rhodium burn-off

A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, and at USD 36-199 for 800 pieces that is the number the buyer signs.

The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is USD 36-199 on the Distributor Tier schedule.

size-step drift

A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, quoted at USD 36-199 per piece in bulk carton, 50 per bag.

Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, and the Distributor Tier quote for it sits at USD 36-199.

[6]Order Terms, Sample Timing and Packing

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 36-199 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is how the Distributor Tier account reads it at USD 36-199.

Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.

[7]What the Quote Actually Covers

Most quotes for engagement Rings describe the product and skip the part that decides whether the buyer makes money, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.

One practical note on timing for engagement Rings: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.

We date the engagement Rings proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, which is how the Distributor Tier account reads it at USD 36-199.

[8]MOQ, Mixed Designs and the Real First Order

This is the question that separates a trading company from a factory, and on engagement Rings the answer is usually shorter than buyers expect, shipped as bulk carton, 50 per bag and certified SGS batch report.

In the US market terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For engagement Rings, we publish the figure per SKU and hold it for the order window rather than for the calendar year, shipped as bulk carton, 50 per bag and certified SGS batch report.

Practically, it shows up in three places for engagement Rings: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.

[9]How a Repeat Order Gets Built

The sequence below is fixed for a Distributor Tier run. The dates move with the stone lot, not with the shipping season, which is how the Distributor Tier account reads it at USD 36-199.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Distributor Tier shipment, which is how the Distributor Tier account reads it at USD 36-199.

[10]Freight, Duty and the Arrival Check

Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, and the Distributor Tier quote for it sits at USD 36-199.

For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 36-199.

Check the count, the weight and stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, which is how the Distributor Tier account reads it at USD 36-199.

[11]What This Means for a First Order

A first Distributor Tier order of 50 pieces per design at USD 36-199 is a test of the line, not a commitment to the range.

Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, quoted at USD 36-199 per piece in bulk carton, 50 per bag.

[12]Frequently Asked Questions

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white engagement Rings, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

How is engagement Rings packed for bulk carton, 50 per bag?

Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 36-199.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, the figure being USD 36-199 for a 800-piece run.

How long does a reorder of the same engagement Ring take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which is how the Distributor Tier account reads it at USD 36-199.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white engagement Rings, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

[13]Next Step

The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Distributor Tier, quoted at USD 36-199 per piece in bulk carton, 50 per bag.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, shipped as bulk carton, 50 per bag and certified SGS batch report.

Related reading: Engagement Rings Trade Show Sample: The Reject Tray Policy That Decides a Partnership - HOLYCOME Wedding Bands Shopify DTC: What a Report Proves and What It Does Not - HOLYCOME

Ready when you are

Send a photograph. Get the price tomorrow.

Request a quote WhatsApp us

MOQ for a single commission is 1 piece; wholesale MOQ is 20 pcs per style. Sampling takes 7-14 days, bulk 15-25 days after CAD approval. Payment is T/T with a 30% deposit, balance before shipment; PayPal and major cards are accepted.

Every piece passes a quality check before dispatch, and authenticity is matched to its certificate, with a return policy and repair service after delivery. Our in-house jewelers and artisans have years of experience setting moissanite and lab-grown stones from responsible, traceable suppliers; customer reviews and commission testimonials are shared in our journal and on the about page. Questions? Email service@holycome.com or WhatsApp +86 13377447107.

WhatsApp us Get a quote
WhatsApp Email