Journal / Wholesale Oem Factory
Bracelets Wholesale: First-Order Landed Cost Math
[1]Why your first bracelets wholesale order always costs more than the quote
Every week a buyer sends me a spreadsheet with a per-piece price and asks me to confirm it is the landed cost. It never is. The unit price you get from any factory, ours included, covers goods leaving the door. Freight, duty, customs brokerage, and payment fees all land after that, and on a first bracelets wholesale order those extras can add 15 to 30 percent to what you thought you were spending.
I have spent 12 years on the QC floor and in the costing meetings, so I want to walk you through the actual math on a real first order. Not a range, not a vague estimate. A worked example with the line items that show up on the invoice.
[2]Line one: what the bracelet itself costs to build
A bracelet is not priced by the piece. It is priced by what goes into it, and there are four inputs that move the number: stone grade, metal weight, clasp and setting labor, and plating if it is silver with a gold finish.
Stone cost by grade
Moissanite in DEF color, VVS clarity runs a fraction of lab-grown diamond at the same millimeter size, which is why it dominates the entry price points. Lab-grown diamond moves the unit cost up sharply and usually only makes sense above a certain retail ticket. Cubic zirconia is cheaper again but will not hold a certificate story, so most trade buyers skip it for anything sold as fine jewelry.
Metal weight is the quiet cost driver
A 925 silver tennis bracelet at 3mm might weigh 8 grams. The same design at 5mm can weigh 19 grams. Silver is priced per gram daily, so that difference is not a design choice, it is a cost decision. Always ask for the gram weight in the quote, not just the millimeter size. Buyers who skip this step get surprised when the sample arrives light and hollow.
[3]A worked example: 100-piece mixed first order
Here is a realistic first order for a US buyer testing the category: 60 moissanite tennis bracelets in 925 silver at 3mm, 25 lab-grown diamond accents at 2mm, and 15 plain silver chain bracelets. Total 100 pieces, mixed SKUs, one shipment.
| Cost line | Basis | Amount (USD) | Notes |
|---|---|---|---|
| Goods at factory | 100 pcs, mixed | 2,850 | Blended unit cost 28.50 |
| Export packing | Per carton | 45 | Individually bagged, boxed |
| Air freight DDP | 5-8 days door | 310 | Duty and clearance included |
| Payment fees | T/T + sample PayPal | 38 | Bank charges both ends |
| Inspection / AQL | Pre-ship | 0 | Included in our QC |
| Landed total | — | 3,243 | 32.43 per piece landed |
So a quote of 28.50 becomes 32.43 in your hands. That gap is 13.8 percent, and it is on the low side because this shipment is light and small. A heavier order or a slower freight lane pushes it higher.
[4]Where first orders leak money
Three places, and I see all three constantly.
- Volume assumptions. Buyers order 100 pieces but price the retail plan as if they bought 500. The per-piece cost at 100 is real; the margin projection is fiction until you reorder.
- Certificate cost. GRA cards are standard on moissanite and cheap in bulk. IGI reports on lab-grown are per-stone and priced individually, so a 25-piece diamond-accent run carries 25 report fees. Budget them as a separate line.
- Sample spend. One sample at retail-style pricing plus PayPal fees plus express shipping can run 60 to 90 dollars before you have ordered anything. Treat it as a cost of validation, not a loss, and get the sample fee credited against the bulk order if you can.
[5]Why our numbers run about 20 percent better
We cut, set, and plate under one roof, so there is no trading-company markup layered between the stone and the clasp. That single fact is where the roughly 20 percent advantage in cost, speed, and yield comes from. A trader buys from a factory, adds margin, and forwards your spec, which also means your spec gets reinterpreted once before it reaches a bench.
On a 100-piece mixed order, the difference between a direct factory and a trading company is usually one full reorder of working capital.
The yield side matters too. Our in-process QC catches stone-setting failures at the bench, not after plating, so we are not scrapping finished pieces. Fewer scrapped pieces means a lower true unit cost, which is what actually lets us hold the quote.
[6]The MOQ and timing reality
Stock designs ship at MOQ 1 piece, which is how most buyers test a style before committing. Custom work, meaning your own design or a modified mold, starts at 30 pieces. Production runs 12 to 18 days depending on stone availability and plating queue. That is the honest window.
Payment is T/T with 30 percent deposit and balance before shipment. For samples we take PayPal because it is faster for both sides. DDP delivery lands in 5 to 8 days, duty paid, so the number on the invoice is the number you budgeted. Every moissanite piece ships with a GRA card, and lab-grown stones carry IGI reports where specified.
[7]How to build your first order so the math works
- Start at 60 to 100 pieces across 3 to 5 SKUs, not one style. You need sell-through data, not a warehouse of one bracelet.
- Ask for gram weight and stone grade in writing on every quote. If a supplier will not put it on paper, the price is not comparable.
- Price your retail off the landed cost, never the factory quote. Add 15 to 30 percent to the quote before you do margin math.
- Keep the first shipment light and air-freight it DDP. Sea freight savings vanish against the cash you tie up waiting.
- Book the reorder while the first batch is still in transit. Your second order at 300 pieces is where the real margin lives.
[8]Frequently Asked Questions
What is the minimum order for bracelets wholesale?
Stock designs start at MOQ 1 piece, so you can sample a style before committing. Custom designs and mold changes begin at 30 pieces per style. Price basis is per piece at the factory, before freight and duty.
How long does a first order take from payment to delivery?
Production runs 12 to 18 days after deposit clears, then DDP delivery adds 5 to 8 days to your door. Custom tooling adds time before production starts. We confirm the schedule in writing with the proforma invoice.
What is the price basis on your quotes?
Quotes are per piece at the factory, based on stone grade, silver gram weight, and clasp type. Freight, duty, and payment fees are shown separately so you can calculate true landed cost. Ask for a DDP quote if you want one all-in number.
Send your SKU list, target quantity, and stone grade to service@holycome.com or WhatsApp +86 133 7744 7107, and we will return a line-by-line landed cost sheet with a sample offer inside 24 hours.