Free express shipping over $99 GRA & IGI certificates Quote in 1 business day

Journal / Wholesale Oem Factory

Bracelets Distributor Tier: How the Second - HOLYCOME
HOLYCOME / NOTESWholesale Oem Factory  ●  9 November 2026  ●  5 MIN

Bracelets Distributor Tier: How the Second - HOLYCOME

[1]Why the Distributor Tier Quote Looks Cheap Until It Lands

In June, a US buyer of bracelets ordered 800 bracelets and asked for the same tennis lines as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

The defect did not surprise us. Clasp torsion failure is the predictable output of a run where nobody wrote the tolerance down, and it is the first measurement we take on an incoming bracelet, priced at USD 32-209 for the 800-piece Distributor Tier run.

Bracelets wholesale piece from the HOLYCOME line in Wuzhou

We did not discount the quote. We changed the gauge, the seat cut, the plating log and the tray rule, and the second run shipped with zero rejects on clasp torsion resistance and overall length within +/-3 mm, and the Distributor Tier quote for it sits at USD 32-209.

[2]What a USD 32-209 Quote Hides

The Distributor Tier price of 800 pieces splits as below. The line buyers challenge is labor, and it is the line that decides the second season, and at USD 32-209 for 800 pieces that is the number the buyer signs.

Cost lineShareWhat moves it
Base metal or alloy for bracelets34%Alloy choice and casting yield
Stone or melee for bracelets25%Sieve range and lot batching
Setting and finishing labor for bracelets22%Jig design and bench minutes
Plating, polish and QC for bracelets15%Per-tray versus per-piece checks
Packaging for bracelets4%bulk carton, 50 per bag

Break the USD 32-209 quote into these five lines and the comparison stops being rhetorical.

[3]The Measurements Behind a USD 32-209 Quote

Price is the first thing compared and the last thing that matters. These four measurements decide the return rate on bracelets, and three of them cost nothing to specify, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 32-209.

Bracelets setting and finish detail on a HOLYCOME factory sample
Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Each line is a gauge, not a slogan. A supplier who cannot quote a number for clasp torsion failure is quoting an opinion about bracelets, which is how the Distributor Tier account reads it at USD 32-209.

[4]Distributor Pricing Tiers on bracelets

A distributor does not buy a bracelet, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, which is USD 32-209 on the Distributor Tier schedule.

What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, which the Distributor Tier file records at USD 32-209 in bulk carton, 50 per bag.

Turn is the number the distributor manages. At USD 32-209 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of bracelets move in 800-piece lots rather than in the 50-piece sample quantity.

[5]What Fails First on bracelets

clasp torsion failure

A box clasp rated for a necklace fails under wrist rotation. The clasp has to be tested in torsion, not only in pull, shipped as bulk carton, 50 per bag and certified SGS batch report.

Our countermeasure is a gauge and a written limit. It adds about 20 seconds per piece and removes the defect from the run rather than from the carton, quoted at USD 32-209 per piece in bulk carton, 50 per bag.

link gap growth

Gaps between links grow when the connecting pin is 0.05 mm under size. A pin gauge on every tenth piece catches it cheaply, which the Distributor Tier file records at USD 32-209 in bulk carton, 50 per bag.

In a 800-piece run this typically shows on 11 of pieces. Catching it means measuring clasp torsion resistance at the tray level, not inspecting the finished carton, which the Distributor Tier file records at USD 32-209 in bulk carton, 50 per bag.

length drift on bangles

A bangle that measures 6.9 inch instead of 7.0 slides differently on the wrist. Oval versus round form changes the fit even at the same number, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

The commercial effect is clasp replacement plus reship, typically USD 9-15 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is USD 32-209 on the Distributor Tier schedule.

[6]MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, priced at USD 32-209 for the 800-piece Distributor Tier run.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 32-209 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is USD 32-209 on the Distributor Tier schedule.

Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of clasp torsion resistance for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and at USD 32-209 for 800 pieces that is the number the buyer signs.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, on a 800-piece Distributor Tier order at USD 32-209.

[7]What the Quote Actually Covers

This is the question that separates a trading company from a factory, and on bracelets the answer is usually shorter than buyers expect, the figure being USD 32-209 for a 800-piece run.

One practical note on timing for bracelets: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 32-209.

We date the bracelets proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, the figure being USD 32-209 for a 800-piece run.

[8]MOQ, Mixed Designs and the Real First Order

Buyers ask it in the first call about bracelets and rarely get a number they can put in a spreadsheet, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.

In North American retail terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For bracelets, we publish the figure per SKU and hold it for the order window rather than for the calendar year, priced at USD 32-209 for the 800-piece Distributor Tier run.

Practically, it shows up in three places for bracelets: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.

[9]From Spec to bulk carton, 50 per bag

On 800 pieces of bracelets the calendar starts at the signed spec, not at the deposit, and it ends with bulk carton, 50 per bag on a pallet, which is how the Distributor Tier account reads it at USD 32-209.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

A 50-piece first order at USD 32-209 is a measurement of clasp torsion resistance, not a commitment to the range.

[10]The Dock Check on bracelets

Air lands in 5-8 days to the US west coast and sea takes three times the transit. At USD 32-209 per piece the choice is a cash-flow decision.

DDP is available for US accounts that want duty and clearance on our side, and it removes the invoice that arrives after the carton clears, and at USD 32-209 for 800 pieces that is the number the buyer signs.

On arrival, weigh a tray and measure ten pieces. Anything outside the band is a claim with evidence rather than a difference of opinion, which is USD 32-209 on the Distributor Tier schedule.

[11]A 800-Piece Test Run

A test run at 50 pieces tells you three things: whether clasp torsion failure is controlled, whether packing survives freight, and whether the count is honest, on a 800-piece Distributor Tier order at USD 32-209.

Put the reject rule in writing before the deposit. The Distributor Tier conversation after arrival is shorter when the rule is already on the order, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 32-209.

[12]Frequently Asked Questions

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white bracelets, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Distributor Tier file records at USD 32-209 in bulk carton, 50 per bag.

How is bracelets packed for bulk carton, 50 per bag?

Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and at USD 32-209 for 800 pieces that is the number the buyer signs.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and the Distributor Tier quote for it sits at USD 32-209.

How long does a reorder of the same bracelet take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which is USD 32-209 on the Distributor Tier schedule.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white bracelets, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Distributor Tier file records at USD 32-209 in bulk carton, 50 per bag.

[13]Next Step

Send a photo or a drawing of the piece you want in bulk carton, 50 per bag. We answer with a price, a calendar and the four measurements above, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.

The factory behind bracelets here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, and the Distributor Tier quote for it sits at USD 32-209.

Related reading: Bracelets Trade Show Sample: The Reject Tray Policy That Decides a Partnership - HOLYCOME Loose Stones Shopify DTC: What a Report Proves and What It Does Not - HOLYCOME

Ready when you are

Send a photograph. Get the price tomorrow.

Request a quote WhatsApp us

MOQ for a single commission is 1 piece; wholesale MOQ is 20 pcs per style. Sampling takes 7-14 days, bulk 15-25 days after CAD approval. Payment is T/T with a 30% deposit, balance before shipment; PayPal and major cards are accepted.

Every piece passes a quality check before dispatch, and authenticity is matched to its certificate, with a return policy and repair service after delivery. Our in-house jewelers and artisans have years of experience setting moissanite and lab-grown stones from responsible, traceable suppliers; customer reviews and commission testimonials are shared in our journal and on the about page. Questions? Email service@holycome.com or WhatsApp +86 13377447107.

WhatsApp us Get a quote
WhatsApp Email