Free express shipping over $99 GRA & IGI certificates Quote in 1 business day

Journal / Colored Birthstone

Birthstone Care and Cleaning Limits
HOLYCOME / NOTESColored Birthstone  ●  9 November 2026  ●  8 MIN

Birthstone Care and Cleaning Limits

A customer in Phoenix cleaned an opal ring in an ultrasonic bath and watched the stone craze within a minute. The bath was working correctly. The stone was the wrong material for the method.

Birthstone care is a material question rather than a cleaning question. Three common methods cover the range, and each fails on a different group of stones.

[1]The three methods

Warm soapy water with a soft brush, an ultrasonic bath, and steam. They escalate in effectiveness and in risk, and the risk is not proportional to the benefit.

MethodSafe forUnsafe for
Soap and brushMost stonesPearl, opal (brush only)
UltrasonicDiamond, sapphire, rubyEmerald, opal, pearl, tanzanite
SteamDiamond, sapphireEmerald, opal, treated stones
NeitherPearlAll methods

The pearl row is literal. A pearl is cleaned with a damp cloth and dried immediately, and nothing else.

Pearl and coloured stone jewellery laid out on a soft cloth for cleaning

[2]Why ultrasonic fails on emerald

An ultrasonic bath vibrates at high frequency and the vibration travels through any liquid already inside the stone. Emerald is commonly fracture filled, and the filler can be displaced by vibration, which leaves the fractures visible.

The same mechanism affects any stone with surface-reaching fractures, which includes most emerald and many ruby. The bath does not damage the crystal; it removes what was put into it.

What the customer sees afterwards

A whitened or dulled surface and a network of lines that were not visible before. The stone is not broken; the filling is gone, and the clarity it was hiding is now visible. Refilling is a specialist treatment and it costs more than the clean did.

[3]Why steam fails on opal

Opal contains water in its structure, typically 5 to 10 percent. Steam applies heat and water at the same time, and a stone that is heated quickly can craze as the water expands.

The failure is usually permanent. Crazing appears as a network of fine cracks that scatter light, and no treatment reverses it.

Treated stones and heat

Any stone that has been heated, oiled or fracture filled should be kept away from steam, because the treatment is not always stable at temperature. That covers a large share of the coloured stone market.

The practical rule for a buyer is to ask the treatment before choosing a method. A stone sold as heated sapphire is stable in steam; a stone sold as fracture filled emerald is not, and the same visual result comes from two different products.

[4]What to do instead

For a stone that is not safe in a bath, the method is warm water, a drop of mild soap and a soft brush, followed by a rinse and a dry with a lint-free cloth. The brush does the work and the water carries the residue away.

For a pearl, the method is a damp cloth only, dried immediately, and the ring should not be soaked because the string and the setting can hold water.

The monthly check

Cleaning is also the moment to check the setting. Run a fingernail along the prongs or the bezel edge; a prong that catches needs attention before it releases the stone.

[5]Storage

A birthstone ring should be stored separately from harder stones, because a sapphire will scratch an opal and a diamond will scratch everything. A soft pouch per piece is the simplest solution and it costs less than a polish.

Pearls should be stored away from heat and direct sun, and they should be worn rather than kept sealed, because they take moisture from the air.

A travel case is the practical version of the same rule. One compartment per piece, no loose stacking, and the case kept out of a car in summer, because a hot car is the fastest way to craze an opal.

[6]What a bench does that a kitchen does not

A bench clean is a controlled operation: the stone is identified, the method is chosen for the material, and the ring is inspected before and after. A kitchen clean is the same idea without the identification step, which is where the damage happens.

Buyers who do not know the stone should clean with the mildest method, and that method is warm water and a soft brush. It is slower than a bath and it has never damaged a correctly set stone.

What the bench checks that the customer cannot

Loose seats, worn prongs and filler stability. A prong that has worn 30 percent still holds the stone, and it will not hold it after another year. That is a bench judgement made with a loupe rather than with the eye.

Cleaning interval by stone

Hard stones tolerate monthly cleaning and show little change. Soft and porous stones benefit from less frequent cleaning, because every clean is a small amount of surface loss. For opal and pearl, quarterly is enough and a wipe after each wear is better than a wash.

[7]What voids a care instruction

Three customer actions defeat the care line: using a household cleaner that contains ammonia, storing the ring loose with harder stones, and wearing it in a pool or a shower. Chlorine attacks the alloy in the setting even when the stone survives.

The setting is often what fails first, and a setting failure loses the stone. That is why care instructions apply to the whole ring rather than to the stone alone.

[8]Care by item type

The item decides the method as much as the stone does. A ring collects residue on the interior and under the setting. A pendant collects it on the back. A pair of earrings collects it at the post.

A ring needs the brush and the soak because the residue sits under the stone. A pendant needs a wipe and a short soak because it has a back face that traps less. Earrings need the post cleaned because skin oils build up there and discolour.

The back of a pendant

An open-back pendant with a coloured stone exposes the pavilion, which is the most vulnerable part of a soft stone. Cleaning it means wiping the back rather than scrubbing, and checking that the stone is not loose in the setting.

[9]What to tell a customer at the sale

One sentence per stone is enough, and it should be written rather than spoken. The sentence names the method, the interval and the one thing to avoid, and it goes on the invoice so it is kept.

A customer who is told to clean it with soap and water, never in a bath, once a month does not damage an emerald. A customer who is told to clean it regularly does.

Why written instructions matter

Because the failure happens months later and the customer will not remember a verbal instruction. A written line on the invoice is also the record that the method was specified, which matters when a stone is damaged by a method the seller never named.

[10]What we tell buyers

Every coloured stone order ships with a care line specific to the stone: the method, the interval and the method to avoid. That line is short enough to be read and specific enough to prevent the failure.

Minimum order is 50 pieces per design and sizes can be mixed. Sample lead time is around 20 days from approved CAD, bulk 25 to 30 days, and stock designs ship in 15 to 20 days under 500 pieces. Payment is a 30 percent deposit with the balance before shipment, by T/T, PayPal or Western Union, with volume pricing at 200 and 500 pieces.

[11]The cleaner that damages a setting

Ammonia based cleaners attack the alloy in a setting before they attack the stone. A silver prong exposed to ammonia repeatedly becomes porous at the surface and loses its grip.

The damage is invisible until the stone moves, and by then the prong has to be replaced rather than tightened. That is a repair rather than a clean.

A mild soap with no ammonia is the safe default for every stone in the birthstone range, and it costs nothing to specify on the care line.

[12]When to replace a setting rather than clean it

Three signs: a prong that has been re-tightened twice, a bezel wall that has been re-burnished once, and a stone that has moved after a clean. Any of those means the setting is at the end of its life.

A replacement is cheaper than a lost stone, and it is the point where a soft stone should also be re-set into a safer type. A prong setting on a soft stone that has already lost one stone should become a bezel.

That is a design decision rather than a repair, and it is worth putting to the customer before the second stone is lost.

[13]Frequently Asked Questions

Can I use an ultrasonic cleaner on an emerald ring?

No. Emerald is usually fracture filled and the vibration can displace the filler. Use warm water and a soft brush instead.

Is steam safe for opal?

No. Opal holds water in its structure and rapid heating can craze it permanently.

How should I clean a pearl ring?

With a damp cloth, then dried immediately. Do not soak it, do not use a brush, and keep it away from heat.

Can I clean a birthstone ring with toothpaste?

No. Toothpaste is abrasive and leaves a dull surface on soft stones. Mild soap and water is the correct method.

[14]Next step

Send the stone and the setting, and we will include the care line with the order. See coloured stone rings in the archive, read the journal on colour grading, or open an order on the contact page.

Ready when you are

Send a photograph. Get the price tomorrow.

Request a quote WhatsApp us

MOQ for a single commission is 1 piece; wholesale MOQ is 20 pcs per style. Sampling takes 7-14 days, bulk 15-25 days after CAD approval. Payment is T/T with a 30% deposit, balance before shipment; PayPal and major cards are accepted.

Every piece passes a quality check before dispatch, and authenticity is matched to its certificate, with a return policy and repair service after delivery. Our in-house jewelers and artisans have years of experience setting moissanite and lab-grown stones from responsible, traceable suppliers; customer reviews and commission testimonials are shared in our journal and on the about page. Questions? Email service@holycome.com or WhatsApp +86 13377447107.

WhatsApp us Get a quote
WhatsApp Email